Replacement Trailer Axle For Dexter Torsion 3,500 lb Axle

Question

Question:

I need to replace a torsion axle on my customers horse trailer and Ive been having a very hard time finding a replacement. It is a Dexter axle SN = D6576164.

asked by: Dominic B

0

Expert Reply:

We don't carry the torsion axle replacements, but if you want the exact replacement you will want the #10 Torflex Torsion Axle. I do have a replacement option if you are interested in an alternative. You can use the Timbren Heavy-Duty Axle-Less Trailer Suspension - 2" Lift Spindle - Standard Tires - 3,500 lbs # TASR35HDS07 which uses a 2 inch square tube (not included) in the integrated holes. This mounts directly to the trailer frame and has the integrated suspension.

expert reply by: Jason S

0

click to enlarge

Answer 1

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your…

view full answer...

Answer 2

The #8-258-50UC1-EZ Idler Hub Assembly you referenced includes the grease cap for an EZ Lube spindle. An EZ Lube spindle has a zerk fitting in the end of it so grease can quickly and easily be added to the hub. The rubber plug in the center of the…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 5

Since Grand Design is kind enough to list certain parts for their trailers I can confirm you have a 33" wheelbase on your 2020 Grand Design Transcend 27BHS. This means the MORryde Rubber Equalizers #MR87ZR will fit your trailer. Although I'm…

view full answer...

Answer 6

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 7

It is possible to replace your 62" long axle with a longer one. Our next size up is going to be a 72" long 2K rated axle like part #e32GR. The axle being 72" across measured from hub-face to hub-face. This axle comes with 5 on…

view full answer...

Answer 8

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…

view full answer...

Answer 9

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 10

The 3 inch shackle bolt part #166081 would be a great option to use with the CE Smith suspension hanger part #CE14016G. This would be a better fitting size than going with the longer 3.5 inch bolt you mentioned.

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...