Trailer Hitch Recommendation for 2019 Ford Transit T250

Question

Question:

I would like to purchase a hitch for my 2019 ford transit 250 but dont know with to buy.

asked by: Javier O

1

Helpful Expert Reply:

Best option for a trailer hitch for your 2019 Ford Transit T250 is the Curt # C14012 which has the highest towing capacity as well as is the most hidden.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

1

Answer 1

The Curt Trailer Connector for Ford and GM Trucks item #C57101 connects to existing wiring for a vehicle that came with a 7-way connector from the factory. You would just need to go behind your vehicle's 7-way connector, disconnect the tabs,…

view full answer...

Answer 2

Unless someone changed the wiring of the factory 7-way on your 2012 Ford F350 then it should be wired like the picture I attached. I think you might be referring to the release tab on the factory harness for your 7-way. Which if you check out the…

view full answer...

Answer 3

You would have to sever the wiring that is going to the backup alarm part of Curt Trailer Connector #C57101. You should be able to access the back of it by removing the screws that hold the alarm in place.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 9

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 10

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...