What Size Trailer Hitch is Available for 2019 Hyundai Sonata

Question

Question:

I have a 2019 Sonata limited 2.0T My car is rated at 3500lbs towing. Do you have a hitch with a 2” receiver ?

asked by: Marc C

0

Expert Reply:

For lighter duty vehicles like your 2019 Hyundai Sonata there are only 1-1/4 inch hitches available like the Draw Tite part # 24965. The 2 inch hitches are reserved for higher capacity vehicles like trucks and SUVs.

expert reply by: Jameson C

0

Answer 1

When installed the Draw Tite hitch part #24965 does move the exhaust hanger bracket to the hitch instead of the factory bracket. Your hanger may need to be adjusted slightly if it's hanging lower. If you had a shop install the hitch…

view full answer...

Answer 2

There are a few differences. First and foremost, the Curt #C11402 is a fit for all 2019 Sonata models, while the Draw-Tite #24965 won't fit Hybrid models or models manufactured in Korea (If first digit of VIN is a 'K', vehicle…

view full answer...

Answer 3

For your 2018 Hyundai Sonata, your best option is to go with the Draw-Tite #24965 trailer hitch for a couple of reasons. The Draw-Tite hitch will offer you 1 extra inch of ground clearance and while this may not seem like much, it can make a…

view full answer...

Answer 4

Yes we do! For your 2016 Hyundai Sonata Hybrid, I recommend using the Draw-Tite Sportframe Trailer Hitch Receiver part #24965. The Draw-Tite Sportframe is a Class I hitch with a 1-1/4" receiver tube opening. This is currently the most cost…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...