Will Stealth Hitches Trailer Hitch Meet Towing Capacity of 2020 Porsche Cayenne

Question

Question:

Will the Stealth hitch for the 2020 Porsche Cayenne - the hitch with both the ball mount and receiver - cover the towing capacity for this vehicle?

asked by: Albert E

0

Expert Reply:

The short answer is yes it certainly will. The Stealth Hitches Trailer Hitch Receiver with Towing Package # SH37FRT that fits a 2020 Porsche Cayenne has a maximum capacity of 8,000 lbs towing and 600 lbs tongue weight, and the '20 Cayenne has a maximum towing capacity of 7,700 lbs (be sure to check your owner's manual to verify the capacity of your model).

This package comes with everything you need for your 2020 Porsche Cayenne to either tow or carry carry accessories, and it has the added benefit of being totally concealed when you have the ball mount or receiver removed from the hitch.

I've added a link to the installation instructions of the Stealth Hitch # SH37FRT for you to check out as well.

expert reply by: Kyle S

0

Answer 1

As far as the easiest hitch to install on a 2021 Porsche Cayenne, unfortunately all of our hitches require bumper removal, wheel well removal, and fascia trimming on your vehicle. However, with that being said, for less area to cut, the Draw-Tite -…

view full answer...

Answer 2

The Stealth Hitches Hidden Rack Receiver #SH37FR you were looking at is indeed confirmed to fit your 2019 Porsche Cayenne Hybrid. You will need to trim a small portion of the underside fascia to give the receiver a location to be exposed. This is not…

view full answer...

Answer 3

Currently we do not have a system that is rated for weight distribution on a 2020 Porsche Cayenne, but we do have the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" #SH37FRT that is rated up to 8,000 pounds towing.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 11

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 12

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...