Size of Hardware for Trailer Hitch Install in 2014 Chevy Cruze

Question

Question:

Good morning , I have a 2014 Chevy Cruze that had a Reese 1-1/4 hidden trailer hitch that was removed as I have no use for it. I want to plug those holes to prevent rust and salt from entering frame. What size bolt or what can I use to plug holes? Best regards

asked by: Deborah L

0

Expert Reply:

The size of the hardware used to install the Draw-Tite Sportframe Trailer Hitch Receiver # 24882 on a 2014 Chevy Cruze is 7/16"-14 x 1-1/4" as you can see in the linked installation instructions.

expert reply by: Kyle S

0

Answer 1

I took a look at the owner's manual for a 2015 Chevy Cruze and it was ambiguous concerning if your vehicle can tow a trailer. On one page it has tips for towing a trailer; on another page it says "The vehicle is neither designed nor intended…

view full answer...

Answer 2

Yes, the Draw-Tite Class I - 1-1/4" #24882 will work well for you, assuming your Verano is not a Turbo or Dual Exhaust model. This hitch will support a hauling gross trailer weight (GTW) of 2,000 lbs. It's a good idea to check your…

view full answer...

Answer 3

I recommend the Curt Trailer Hitch Receiver part #C11282 because you have an extra 3/4" ground clearance compared to the other option for the Chevy Cruze. This is important when carrying a cargo carrier because they are less likely to drag the…

view full answer...

Answer 4

Both the Draw-Tite #24882 and Curt #C11282 trailer hitches are confirmed to fit all models of the 2011 Chevrolet Cruze, including your ECO. In fact, we have a customer review that was sent in where they installed the Draw-Tite hitch on their ECO…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...