Difference Between Curt and Draw-Tite Hitches for 2019 Subaru Crosstrek

Question

Question:

Besides the higher capacity of the 76209 drawtite hitch, is there anything else that differentiates these two hitches? Which one is easier to install on a 2019 crosstrek? Is one more hidden than the other? I plan on towing an aluminum kayak trailer so weight isn't really an issue. Thanks!

asked by: Raymond

0

Expert Reply:

Yes, the biggest difference between the Curt trailer hitch # C13382 and the Draw-Tite Max-Frame hitch # 76209 is that cross-tube on the Curt hitch is hidden behind the bumper, whereas on the Draw-Tite it's fully visible as shown in the comparison photos on a 2019 Crosstrek I've attached. For this reason, I recommend the # C13382.

The installation on both hitches is pretty straight forward, requiring only to lower the muffler, insert the hardware in the frame and raise the hitch in place before torquing to specs. The Curt hitch will also sit slightly higher (15-1/4 inches), giving you 1 extra inch of ground clearance as well when compared to the 14-1/4 inches of ground clearance on the Draw-Tite.

As you mentioned, either hitch should be rated for more than enough to tow your lightweight aluminum kayak trailer. According to the online version of your owner's manual, your 2019 Subaru Crosstrek is limited to 1,000 lbs towing (1,500 when the trailer is equipped with brakes) and 200 max tongue weight anyway, but you'll want to confirm this in your printed copy.

To complete your towing package, I recommend the following:

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 - customer favorite for long-term dependability.

Curt Towing Starter Kit for 2" Hitches # C45554 - includes ball mount with a pre-torqued hitch ball; hitch pin and clip; hitch receiver lock with keys; hitch cover; and a storage case.

Check out the installation videos I've included for you at the bottom of the page.

expert reply by: Carla M

0

click to enlarge

Answer 1

The Curt #C13382 and etrailer #e98912 hitches for your 2022 Subaru Crosstrek have the same construction, capacities, and design, but the big difference is that the Curt hitch has the classic glossy finish while the etrailer hitch has a matte black…

view full answer...

Answer 2

Yes, one of the hitches that are designed for a Subaru Crosstek also fit your 2021 Hybrid. I recommend using the EcoHitch item #306-X7365 2" receiver, it has been confirmed to fit your hybrid model. The receiver has a 4500 lbs towing…

view full answer...

Answer 3

Yes, for your 2020 Subaru Crosstrek Plug-In Hybrid I highly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76209 that's confirmed to fit and will work perfectly. This durable hitch features custom brackets that line up to…

view full answer...

Answer 4

When we installed the etrailer hitch part #e98912 on a 2021 Subaru Crosstrek like yours we found that the distance from the ground to the bottom of the hitch measured 13 inches.

view full answer...

Answer 5

We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part #36644 that you mentioned. When we installed the 2 inch hitch part #76209 on a 2018 Impreza like…

view full answer...

Answer 6

Both the hitches you mentioned have the same ground clearance. The Draw Tite #76209 and the Curt #C13382 both have 15 inches from the top of the hitch opening down to the ground.

view full answer...

Answer 7

The best hitch for your 2018 Subaru Crosstrek for carrying a bike rack is the Draw Tite part #76209 as it does not require using a stabilizer strap with a non-supported load like a bike rack like the Curt hitch does. But to your specific question…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...