Trailer Hitch Installation - 2016 Subaru Crosstrek - Curt Video

Yes, for your 2020 Subaru Crosstrek Plug-In Hybrid I highly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76209 that's confirmed to fit and will work perfectly. This durable hitch features custom brackets that line up to…

Yes, one of the hitches that are designed for a Subaru Crosstek also fit your 2021 Hybrid. I recommend using the EcoHitch item #306-X7365 2" receiver, it has been confirmed to fit your hybrid model. The receiver has a 4500 lbs towing…

The EcoHitch part #306-X7203 is designed to be completely hidden behind the knockout plate so you don't have to see an unsightly crosstube underneath your vehicle. I attached a picture that I took from an install video that shows the cover…

We haven't had the chance to install and film the EcoHitch Invisi Trailer Hitch #306-X7203 going on a 2016 Subaru Crosstrek. It will be a little like the installation of other hitches for the vehicle, not completely the same, but the video I…

There is a bit of fascia trimming needed on your 2019 Subaru Impreza hatchback to install the EcoHitch Hidden Trailer Hitch Receiver #306-X7350. If you check out the accompanying cut out you can see that it requires a 2-1/2" square to be…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

You need to use the mounting hardware that is included with Curt trailer hitch #C13135 or it will void the hitch warranty. The access hole only MIGHT need to be enlarged. It is possible that you will not have to enlarge it at all. If you do need to…

I spoke with Curt and verified that the correct trailer wiring harness for a 2014 Subaru XV Crosstrek Hybrid is the Curt T-Connector Vehicle Wiring Harness #C56243. They said the reason is the other harness is multi-fit for a number of vehicles and…

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame #24792, feature a square tube design, while the Class III hitches like the…

The reason why the Curt Trailer Hitch Receiver #C13135 that fits your 2017 Subaru Crosstrek requires Stabilizing Strap #18050 for accessories like bike racks but the other hitches that fit your car don't - the Draw-Tite #76084 and EcoHitch…

Any trailer hitch whose receiver tube is positioned below a vehicle's rear bumper is going to reduce ground clearance and approach angle to some degree. The actual clearance lost depends on many factors including wheel/tire size, passenger and…

For your 2012 Hyundai Elantra Sedan the hitch I would recommend is the Draw Tite part #24902 because it has the best price, the shorter install, and if you were to ever carry a bike rack you wouldn't have to use a stabilizer strap like the Curt…