Draw-Tite Trailer Hitch Installation - 2020 Subaru Crosstrek Video

We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part #36644 that you mentioned. When we installed the 2 inch hitch part #76209 on a 2018 Impreza…

You'll want to scrape off the undercoating so that the hitch will mount to a flat surface. If you expose any bare metal from the scraping, you can shoot any bare metal with a quick shot of rust inhibiting spray paint if you wish. Since…

The Curt Class I Trailer Hitch Receiver #C11465, the Draw-Tite Class I Sportframe Trailer Hitch Receiver #DT24959, and Draw-Tite Class II Trailer Hitch Receiver #36644 are all within roughly a 1/4inch of ground clearance when installed on your 2018…

The Draw-Tite Class II #36644 hitch fits the 2018 - 2021 Subaru Crosstrek and the 2018 - 2021 Subaru Impreza 5-Door Wagon with Single Exhaust.

Thanks for reaching out! To add tail lights and a license plate to your Kuat NV 2.0 Bike Rack #NV22G I recommend picking up the Curt Auxiliary LED Indicator Lights #C53201 and the Thule License Plate Holder #TH35JV - you'll need to splice…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 which is a fit for a 2010-2019 Subaru Outback will install via eight total 10mm nuts which are actually reused as they are the factory fasteners for the bumper beam. The most up to date…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I checked with Draw-Tite and can confirm for you that the Draw-Tite Trailer Hitch #36644 you asked about will fit your 2019 Subaru Crosstrek hybrid. I attached an install video for this for you to check out as well.

Installing a wiring harness, like the Tekonsha T-One Vehicle Wiring Harness #118467, on your 2020 Subaru Crosstrek will require access/removal of a few panels in the rear cargo area. I included an install video for you to check out that will…

I was able to confirm with Draw-Tite that they do have a trailer hitch receiver which is a confirmed fit for your 2019 Subaru Crosstrek hybrid, which is the following hitch: - Draw-Tite Max-Frame Trailer Hitch Receiver #36644

For your Thule T2 classic the correct hitch pin/lock replacement you'd need is the part #THSTL2 which comes with everything needed. The bolt you mentioned does not fit the T2 so it would not be what you need.

The Thule Snug Tite Hitch Lock and Anti-Rattle Device, #THSTL2, is the only hitch pin lock that can be used with Thule bike racks. The racks and lock are both uniquely threaded to be compatible with each other so another lock, like the Softride…