Replacement Latch for Titan Model 60 Brake Actuator

Question

Question:

DO YOU HAVE THE EXACT REPLACEMENT LATCH FOR THIS COUPLER? T47154207K

asked by: SKYE

0

Expert Reply:

We do carry the exact replacement latch for the Titan Model 60 Brake Actuator you referenced.

The latch by itself is the Replacement Ball Latch # T4335800 and there is also the Latch Repair Kit # T4045400 which will work.

expert reply by: Kyle S

0

Answer 1

If you're referring to the ball latch then yes, what you'll need is the Replacement Ball Latch for Titan and Dico Model 60 Hydraulic Brake Actuators part #T4335800.

view full answer...

Answer 2

Since it sounds like the latch is the source of the problem you will want to replace it with a repair kit. The correct repair kit for your Titan Model 60 Multi-Fit coupler is the Latch Repair Kit for Titan Multi-Fit Couplers and Brake Actuators…

view full answer...

Answer 3

The Replacement Ball Latch for Titan and Dico Model 60 Hydraulic Brake Actuators #T4335800 that you referenced is the correct replacement latch kit you'd need for your actuator. In the picture I attached you can see that the top hole is supposed…

view full answer...

Answer 4

I contacted Dexter Axle since they acquired Titan and they have not heard of the Titan series 80 actuator or coupler. The Repair Kit for Titan Couplers and Trailer Brake Actuators - 2-5/16" Ball part #T1848700 is the correct latch repair kit for…

view full answer...

Answer 5

If you are looking for a latch repair kit for your Dico model 60 actuator then you can use #T4045400 that you have referenced. It fits Titan, Dico, and Demco model 60 actuators. If you are looking for a different component we may have a replacement…

view full answer...

Answer 6

Not all hydraulic trailer drum brakes can be reversed without the brakes activating. If the trailer has brake assemblies that have free-backing plates then a reverse lockout solenoid is not needed. If your neighbor can back his trailer up without the…

view full answer...

Answer 7

The replacement Hand Wheel Lock for Model 6 and 60 Actuator, #T2338300, contains one hand wheel lock and does not come with a spring. For replacement springs you will want the Latch Repair Kit for Titan Multi-Fit Couplers and Brake Actuators…

view full answer...

Answer 8

While there is not a rebuild kit for the Titan Model 60 brake actuator, we do have several replacement parts available. Replacement Master Cylinder Assembly for Drum Brakes - part #T439510 Replacement Push Rod Assembly for Brake Actuator - part…

view full answer...

Answer 9

I spoke with my contact at Titan, and he said that your Zinc-Plated Coupler #T2343400183 with the handwheel and the Titan Leverlock Coupler #T4845000 are manufactured differently, so the mechanisms are not interchangeable. You will not be able to use…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...