Repair Kit for a Dico Model 60 Trailer Brake Actuator Coupler

Question

Question:

what kit can I safely use on my DICO model 60

asked by: Duane

0

Expert Reply:

If you are looking for a latch repair kit for your Dico model 60 actuator then you can use # T4045400 that you have referenced. It fits Titan, Dico, and Demco model 60 actuators. If you are looking for a different component we may have a replacement part or kit if you can tell me specifically what needs repaired.

expert reply by: Michael H

0

Answer 1

Since it sounds like the latch is the source of the problem you will want to replace it with a repair kit. The correct repair kit for your Titan Model 60 Multi-Fit coupler is the Latch Repair Kit for Titan Multi-Fit Couplers and Brake Actuators…

view full answer...

Answer 2

I contacted Dexter Axle since they acquired Titan and they have not heard of the Titan series 80 actuator or coupler. The Repair Kit for Titan Couplers and Trailer Brake Actuators - 2-5/16" Ball part #T1848700 is the correct latch repair kit for…

view full answer...

Answer 3

We do carry the exact replacement latch for the Titan Model 60 Brake Actuator you referenced. The latch by itself is the Replacement Ball Latch #T4335800 and there is also the Latch Repair Kit #T4045400 which will work.

view full answer...

Answer 4

The Replacement Ball Latch for Titan and Dico Model 60 Hydraulic Brake Actuators #T4335800 that you referenced is the correct replacement latch kit you'd need for your actuator. In the picture I attached you can see that the top hole is supposed…

view full answer...

Answer 5

To replace your Dico Model 60 surge brake actuator for your trailer's drum brakes I recommend the Titan Zinc-Plated Leverlock Brake Actuator, part #T43397007K. This is the Model 60 Brake Actuator designed for drum brake applications and has a…

view full answer...

Answer 6

Yes, you do need a bolt-on to replace your A-60 actuator, and the swing-away won't be a factor since you are not using it. So long as you have a 3" x 5" straight tongue and drum brakes the correct replacement for an A-60 actuator is the…

view full answer...

Answer 7

I went out to the warehouse to pull the Replacement Master Cylinder Filler Cap #T4480701 for your older Titan Model 60 Actuator. I was able to find that the rubber piece you described is actually the diaphragm insert that is sealed within the cap.…

view full answer...

Answer 8

Yes, the Dexter Brake Actuator part #T47457007K that you referenced is a replacement for your Titan Model 60 actuator.

view full answer...

Answer 9

You are correct that the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 you were looking at is the replacement master cylinder for your older 23361. I included a video of the Titan #T4395100 for…

view full answer...

Answer 10

What a lockout on a hydraulic brake coupler does is prevent the brakes from applying when you back the trailer. An electric lock out is tied into the reverse lamp circuit on the vehicle so that when the vehicle is shifted into reverse the solenoid in…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Thank you for the pictures! For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX29FR to replace your current actuator. The #DX29FR has a 7500lb trailer weight…

view full answer...

Repair Kit for a Dico Model 60 Trailer Brake Actuator Coupler

Product Page this Question was Asked From

Continue Researching