Will Trailer Hitch Installation on 2019 Mazda MX-5 Miata Void Warranty

Question

Question:

You are actually covered by the Federal Magnuson-Moss Warranty Act which states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question. This means that unless the Curt Trailer Hitch # C11435 that you referenced is the reason that you are needing repairs on your 2019 Mazda MX-5 Miata the dealer has to honor the warranty. If you let me know what you plan on using the trailer hitch for I can make additional recommendations if necessary.

asked by: David G

1

Helpful Expert Reply:

You are actually covered by the Federal Magnuson-Moss Warranty Act which states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question. This means that unless the Curt Trailer Hitch # C11435 that you referenced is the reason that you are needing repairs on your 2019 Mazda MX-5 Miata the dealer has to honor the warranty.

If you let me know what you plan on using the trailer hitch for I can make additional recommendations if necessary.

expert reply by: Jon G

1

David G.

7/3/2019

You are actually covered by the Federal Magnuson-Moss Warranty Act which states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question. This means that unless the Curt Trailer Hitch # C11435 that you referenced is the reason that you are needing repairs on your 2019 Mazda MX-5 Miata the dealer has to honor the warranty. If you let me know what you plan on using the trailer hitch for I can make additional recommendations if necessary.

Reply

Jon G.

7/3/2019

I can definitely see where some confusion is found by their statement. While the owner's manual does specifically state "Your Mazda is not designed for towing. Never tow a trailer with your Mazda" there isn't anything in there stating not to install a trailer hitch. Your contact at Mazda skirted around telling you that it would void the warranty by saying "there are no bike rack accessories offered by Mazda" (which any bike rack wouldn't be from Mazda as they don't make them) and "any after market part or modification can void warranty coverage". The keyword in that second phrase it can. If they said "will" then that would be a different story. Basically it is their way of discouraging this use so that if anything does happen you can't come back and say that they said it was okay when in reality unless the trailer hitch actually causes the damage your warranty can't be voided. Also be sure to stay within the weight ratings of your vehicle to help prevent damaging anything. For a bike rack I recommend using the Kuat NV 2.0, which comes in both Gunmetal Gray # NV12G and Metallic Black # NV12B, because this is a high-end bike rack that is compatible with any bike frame style out there that doesn't use a front fender and it is one of the most (if not THE most) stylish bike racks on the market today. The NV 2.0 comes fully loaded with bike and rack locks, an integrated anti-rattle system, a convenient lever for tilting/folding the rack with your foot, and a bike repair stand. I have attached a review video for you to check out. Please note that if you have a fat tire bike (larger than 3") then you need the Fat Bike Strap # APBK to accommodate a tire up to 4-3/4".

Reply

Answer 1

To tow your motorcycle trailer with you 2016 Mazda Miata you will need both a hitch and a vehicle wiring harness. For the 2016 Miata, if you do not already have a hitch, them I recommend the Curt Trailer Hitch Receiver, #C11435.The hitch will install…

view full answer...

Answer 2

Running the 12 volt power power wire for the Curt #C56300 on your 2021 Mazda Miata can definitely be tricky. This really should be connected to the battery as this will keep the wiring from causing any interference with the vehicle's computers.…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C11435 referenced in your question is a Class I trailer hitch and is confirmed to fit your 2016 Mazda MX-5 Miata. The hitch will always be somewhat visible when looking at your vehicle from behind, whether or not it…

view full answer...

Answer 4

I don't have a precise ground clearance measurement for the Curt Class I #C11435 (nor does Curt), but as you can see in the provided photo, the receiver tube will sit flush against the underside of the bumper fascia. If you measure approximately…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Will Trailer Hitch Installation on 2019 Mazda MX-5 Miata Void Warranty

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching