Curt Trailer Hitch Receiver Installation - 2019 Mazda MX-5 Miata Video

When looking at platform-style bike carriers like the Swagman XTC-2, part #S64670, fixed rack means the rack will not tilt away from the rear of the vehicle allowing access to the rear cargo area. A fixed rack will not fold up or tilt. The fold-up…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Running the 12 volt power power wire for the Curt #C56300 on your 2021 Mazda Miata can definitely be tricky. This really should be connected to the battery as this will keep the wiring from causing any interference with the vehicle's computers.…

I don't have a precise ground clearance measurement for the Curt Class I #C11435 (nor does Curt), but as you can see in the provided photo, the receiver tube will sit flush against the underside of the bumper fascia. If you measure approximately…

The Curt Trailer Hitch Receiver #C11435 referenced in your question is a Class I trailer hitch and is confirmed to fit your 2016 Mazda MX-5 Miata. The hitch will always be somewhat visible when looking at your vehicle from behind, whether or not it…

You are actually covered by the Federal Magnuson-Moss Warranty Act which states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your…

To tow your motorcycle trailer with you 2016 Mazda Miata you will need both a hitch and a vehicle wiring harness. For the 2016 Miata, if you do not already have a hitch, them I recommend the Curt Trailer Hitch Receiver, #C11435.The hitch will install…

The only trailer hitch that fits your 2018 Hyundai Elantra SEL is the part #C11424, and you need to make sure have the factory tow loop (see linked instructions) for this one to fit. If you don't have that factory tow loop then you could use a…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

No the Curt hitch part #C11067 that you referenced cannot support 190 lbs of bike rack and bikes as it has a 150 lb tongue weight capacity. It is the only hitch that we have available for your fiesta as of October 2023. Additionally, since the…

The Curt #C11424 would be a perfect fit for your 2018 Hyundai Elantra if it were not the Sport model. Unfortunately, our hitch manufacturers don't have anything compatible with the Elantra sport at this time (3/2023). We do offer trunk mounted…

It took me a couple of minutes but I finally found that table. That is actually in the instructions for the hitch #C11435 for the 2017 Mazda Miata. The table is laid out kind of weird. It does make it look like the top row of numbers is tongue…