Will Curt Trailer Hitch # C11435 be Visible after Installed on 2016 Mazda MX-5 Miata

Question

Question:

Curt Class I Hitch C11435 on 2016 Mazda MX-5 Miata Hello would you please let me know if this hitch can be hidden when not in use? Or is the receiver assembly always visible ? Thank you

asked by: Stormy C

0

Expert Reply:

The Curt Trailer Hitch Receiver # C11435 referenced in your question is a Class I trailer hitch and is confirmed to fit your 2016 Mazda MX-5 Miata. The hitch will always be somewhat visible when looking at your vehicle from behind, whether or not it is being used. The installed hitch though will blend in nicely under your MX-5 along with the exhaust and frame.

I have attached an image that shows what the MX-5 will look like with the hitch installed as well as the installation details for you to check out.

I have also included a link that will take you to our available selection of Class I compatible bike racks and cargo carriers for you to look at.

expert reply by: Chris R

0

click to enlarge

Answer 1

Yes, the Curt hitch part #C11435 is a confirmed fit for your 2016 Mazda MX-5 Miata and would have enough capacity for pulling a jetski trailer. It has a 2,000 lb capacity which would be more than enough. For trailer wiring you'd then need…

view full answer...

Answer 2

The Curt Class I Trailer Hitch Receiver #C11435 is confirmed to fit your 2016 Mazda MX-5 Miata. This trailer hitch features a 1-1/4 inch hitch receiver that will work well with the Kuat Beta 2-Bike Rack #B202-114. This is a great, light-weight bike…

view full answer...

Answer 3

The Swagman XTC-2 2-Bike Platform Rack part #S64670 weighs right around 33 lbs. This will actually be one of the lightest platform style bike racks we offer. It has a 3" raised shank which will help with ground clearance and it can be folded…

view full answer...

Answer 4

Running the 12 volt power power wire for the Curt #C56300 on your 2021 Mazda Miata can definitely be tricky. This really should be connected to the battery as this will keep the wiring from causing any interference with the vehicle's computers.…

view full answer...

Answer 5

I don't have a precise ground clearance measurement for the Curt Class I #C11435 (nor does Curt), but as you can see in the provided photo, the receiver tube will sit flush against the underside of the bumper fascia. If you measure approximately…

view full answer...

Answer 6

To tow your motorcycle trailer with you 2016 Mazda Miata you will need both a hitch and a vehicle wiring harness. For the 2016 Miata, if you do not already have a hitch, them I recommend the Curt Trailer Hitch Receiver, #C11435.The hitch will install…

view full answer...

Answer 7

You are actually covered by the Federal Magnuson-Moss Warranty Act which states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your…

view full answer...

Answer 8

If sounds like you may have LED lights on the trailer you are towing your 2017 Mazda CX-3 with. What is likely happening is that is a little bit of power on the lighting circuits for the T-Connector #C56300 and since LEDs use next to no power that…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Will Curt Trailer Hitch # C11435 be Visible after Installed on 2016 Mazda MX-5 Miata

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching