Ground Clearance Under Curt C11435 Installed on 2019 Mazda Miata

Question

Question:

Incredible site....am thinking about buying a 19 Miata....would purchase the # C11435 from you guys. Do you have any data on clearance? Looks like it sites high...but I have a 16 Mustang and my hitch scrapes on many bumps and dips....concerned Miata will be worse

asked by: Michael J

0

Expert Reply:

I don't have a precise ground clearance measurement for the Curt Class I # C11435 (nor does Curt), but as you can see in the provided photo, the receiver tube will sit flush against the underside of the bumper fascia. If you measure approximately 2 inches downward from the lowest point of the bumper fascia, you'll have a pretty accurate idea of where the underside of the receiver would sit.

If you'll be using the hitch for light-duty towing, you'll need a few other items to complete your towing system. For a trailer wiring harness, use # C56300, for a ball mount, use # C45521. for a 1-7/8 inch trailer ball, use # A-80 or # A-82 for a 2 inch ball.

expert reply by: Mike L

0

click to enlarge

Answer 1

The Curt Trailer Hitch Receiver #C11435 referenced in your question is a Class I trailer hitch and is confirmed to fit your 2016 Mazda MX-5 Miata. The hitch will always be somewhat visible when looking at your vehicle from behind, whether or not it…

view full answer...

Answer 2

To tow your motorcycle trailer with you 2016 Mazda Miata you will need both a hitch and a vehicle wiring harness. For the 2016 Miata, if you do not already have a hitch, them I recommend the Curt Trailer Hitch Receiver, #C11435.The hitch will install…

view full answer...

Answer 3

Running the 12 volt power power wire for the Curt #C56300 on your 2021 Mazda Miata can definitely be tricky. This really should be connected to the battery as this will keep the wiring from causing any interference with the vehicle's computers.…

view full answer...

Answer 4

You are actually covered by the Federal Magnuson-Moss Warranty Act which states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your…

view full answer...

Answer 5

If sounds like you may have LED lights on the trailer you are towing your 2017 Mazda CX-3 with. What is likely happening is that is a little bit of power on the lighting circuits for the T-Connector #C56300 and since LEDs use next to no power that…

view full answer...

Answer 6

We do have an option for your 2021 Mazda MX-5 Miata, the Curt Trailer Hitch Receiver #C11435. This hitch is a class I trailer hitch that is capable of 2,000lbs GTW and 200lbs maximum tongue weight. You'll want to check your vehicle's…

view full answer...

Answer 7

The correct trailer wiring harness from Curt that fits your 2016 Mazda MX-5 is the part #C56300 which installs easily by plugging inline with your taillight connectors and also does not require any splicing.

view full answer...

Answer 8

I am sorry to hear about the issue you are having while using your bike rack. I do have some options for you to display your license plate with the bike rack attached but Thule does not offer any products for this purpose. The vast majority of law…

view full answer...

Answer 9

The Tucson went through a redesign for the 2023 model year so a hitch for a 2017 will not fit the 2023 Hyundai Tucson. To add a hitch to a 2023 Hyundai Tucson, I recommend the Curt Trailer Hitch item #C94WR. This hitch is custom fit and bolts to your…

view full answer...

Answer 10

The Optronics Sealed, Streamline LED Trailer Light #STL79RB referenced in your question will work to provide an additional light on your bike rack, however there may be easier options. You might have trouble mounting the light assembly to the rack…

view full answer...

Answer 11

It took me a couple of minutes but I finally found that table. That is actually in the instructions for the hitch #C11435 for the 2017 Mazda Miata. The table is laid out kind of weird. It does make it look like the top row of numbers is tongue…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Ground Clearance Under Curt C11435 Installed on 2019 Mazda Miata

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching