Boat Trailer Roller Bunk Replacement Rubber Wheels
Question:
I have a pair of these bunk rollers purchased 1 1/2 years ago. I am far from happy with the rubbers on these channels. I trailer my boat approximately 20 times a year. The rubbers are very soft and are peeling. Ive had to try to repair 4 of these already. These rubber wheels should be much sturdier for my boat , a 16 foot Lowe with a 20 hp Mercury 4 stroke. The weight of my boat and motor shouldnt peel these rollers like they are now. The rollers run perfectly between the keels , but that hasnt stopped the rubbers from failing. I installed the roller systems on my Karavan Galvanized boat trailer after removing the bunks that were on the trailer when I purchased the trailer new. Please tell me that they are changing the wheels to a stronger more durable rubber , something that is made in America , and better quality.
asked by: Donald E
Expert Reply:
There have not been any updates to the CE Smith Rollers, but you may want to consider the Replacement Roller for Dutton Lainson Roller Bunks # DL203228 which are a little stronger as the roller is made for boats up to 1,000 lbs heavier than the CE Smith rollers. These rollers are 2-1/4 inches diameter and 1-3/8 inches wide with a hole in the middle that is 9/16 of an inch.
Products Referenced in This Question
Replacement Roller for Dutton Lainson Roller Bunks
- Accessories and Parts
- Boat Trailer Parts
- Roller Parts
- 2-1/4 Inch Diameter
- Rollers
- 1-3/8 Inch Wide
- Dutton-Lainson
more information >
Product Page this Question was Asked From
CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- CE Smith
more information >
Continue Researching
- Search Results: roller bunks
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Shop: CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall - White - 1 Pair
- Shop: Trailer Hitch
- Search Results: rollers
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: Trailer Wiring
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21741 Review
- Shop: Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Search Results: bunk rollers
- Search Results: roller bunk
- Video: CE Smith Bolster and Swivel Bracket Assemblies Review
- Search Results: ce10003g~4
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Review
- Video: CE Smith Boat Trailer Roller Shaft with Pal Nuts Review
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21754 Review
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Q&A: Does the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks CE48870 Come Pre-Greased
- Q&A: Option to Replace Axle With Axle-Less System on PWC Trailer
- Q&A: CE Smith Multi Sport Plus Boat Trailer with Bunks # CE48870 Overall Width
- Q&A: How Far Should Rollers Install Behind Rear of Trailer Frame
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Q&A: Size of U-Bolt Slots in Dutton-Lainson # DL21742 Roller Bunk Bracket for Roller Bunks DL21740/41
- Q&A: Roller Bunk Recommendation for a Boat Trailer With 8 Feet Bunks
- Q&A: How To Determine Correct Bunk Boards and Mounting Hardware For 17' V Bottom Boat
- Article: Boat Trailer Guides: Which are the Best?
- Article: Trailer Wiring Diagrams