Curt Front Mount Trailer Hitch Installation - 2017 Nissan Frontier Video

The connectors you have found are not confirmed to be for the trailer wiring and we don't have any wiring harness that is a fit for what you described. Because you don't have the factory trailer wiring, I recommend starting with the…

Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks #THTP42 and Yakima Tracks #Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers #Y53TR with these…

For your 1999 Toyota Tacoma the brackets you'd need are the #K285120 to use the Detail K2 Storm II Snowplow part #K2STOR8422 that you referenced.

The anti-rattle adapter I recommend is the No-Rattle Trailer Hitch Wedge, part #MPG908. This will work for 1-1/4 inch and 2 inch receivers and is designed to insert into the small gap that may exist on your receiver. You then tighten it up after it…

The front-mount trailer hitch receiver you referenced, Curt #31241, is a fit for specific Nissan and Suzuki vehicles including your 2014 Frontier. No drilling is required but the air dam (lower fascia) and tow hooks must be permanently removed for…

When using a single set of tire chains on a vehicle that is 4 wheel drive or all wheel drive you want to install the chains on the primary drive axle. Typically this will be listed in the owner's manual. But for a 4WD drive vehicle the axle to…

The closest hitch mounted cargo carrier that we offer to the dimensions you give is the Pro Series 20x47 Cargo Carrier, #63155. This carrier fits 1-1/4 inch trailer hitch receivers and has a weight capacity of 300 lbs. If you have a 2 inch trailer…

I recommend using the Yakima LongArm Truck Bed Load Extender - 2" Hitches - Aluminum - 300 lbs #Y01149 to carry your canoe on your 2021 Ram 2500. The Yakima Bed Extender will extend 4' from your 2" hitch, giving you the extra length you…

There is not a dual hitch receiver for the 1-1/4 inch receivers as they are not able to handle the torque due to the tongue weight location. The tongue weight of the hitch is reduced by 50% when using an adapter, so it really wouldn't be worth…

There is not a template for trimming the air dam on your 2018 Nissan Frontier so you will want to look at the attached photo which shows how we trimmed the air dam. This way you can install it back onto your 2018 Nissan Frontier with the Curt Front…

Yes, you will need to remove the center air dam on your 2015 Nissan Frontier to install front mount hitch #65075. Nothing should have to be modified though and if you even take the hitch off you could put the air dam back into place.

For the Curt Trifles the " . " means that the controller is in standby mode with not trailer connected. "2.0" flashing constantly means that it is in output adjustment mode. Have you tried connecting to a trailer to see if it…