Towing Capacity of EcoHitch Trailer Hitch Receiver on 2017 Subaru WRX STI Limited

Question

Question:

I have a 2017 Subaru WRX STI Limited. I have read that many with this car are using the Eco-Hitch for towing hitch needs. I notice that most are using it for a bike rack. My question is: Can I tow a 16 foot jon boat with this setup? Thanks!

asked by: Robert S

0

Expert Reply:

The EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7257 is a great fit for your 2017 Subaru WRX STI Limited. It is rated for towing up to 3,500 lbs but Subaru does not recommend towing with your vehicle according to the owner's manual. Many customers have chosen to tow small trailers anyway and we have not heard of issues but it would be at your own risk.

If you decide to tow your 16 foot jon boat with this vehicle, you will need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56259 and a compatible ball mount like the Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 4" Drop or Rise Item # AM3462 which gives you up to 4" of rise or drop. You will also need a hitch pin like # PC3 or a hitch lock like # AM3493 for additional security.

expert reply by: Jason S

0

Answer 1

There are pros and cons to a design like this product yearning for pure invisibility. While it's certainly a nice aesthetic, it's understandable that the flushness of it might create some clearance issues that would otherwise be absent with…

view full answer...

Answer 2

I went out to our warehouse to take a look at the EcoHitch Class III Trailer Hitch #306-X7257 referenced in your question, which is confirmed to fit your 2015 Subaru WRX. The receiver is actually hollow but from front to back it measures exactly 4…

view full answer...

Answer 3

The maximum capacities are indeed set by the vehicle manufacturer; trailer hitches are often made to withstand values that go past those capacities but you do need to abide by the maximum capacities set by your owner's manual. I took a look and…

view full answer...

Answer 4

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Towing Capacity of EcoHitch Trailer Hitch Receiver on 2017 Subaru WRX STI Limited

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching