etrailer Class III Trailer Hitch Installation - 2024 Hyundai Palisade Video

I would be happy to. I took a screenshot from the instructions and attached it below. To install the etrailer Hitch item #e95ZR on your 2024 Hyundai Palisade you will need the following tools: Ratchet Torque Wrench 6" Socket Extension 11,…

Yes, Curt has confirmed that the Curt Trailer Hitch Receiver #C13427 is going to be a compatible fit for the 2024 Hyundai Palisade. For the wiring you'll need the Curt T-Connector Vehicle Wiring Harness #C43FV. This wire harness has easy…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Curt trailer wiring harness part #C93FV would be what I recommend for your 2023 Kia Telluride . This installs easily by plugging inline with your taillights and has a reliable converter box.

Yes, the trailer hitches we offer are compatible with your 2023 Hyundai Palisade XRT. Attached is a photo another customer sent in of the etrailer Trailer Hitch Receiver #e95ZR installed on their 2023 Hyundai Palisade XRT for you to reference.

The trailer hitch I recommend for a 2020 Hyundai Palisade is the etrailer Trailer Hitch Receiver part #e95ZR. The etrailer hitch offers a bolt-on install with no cutting, drilling, or welding required. It has a hidden design so the only thing shown…

Yes if you used a self-tapping screw like the part #FA1131822 you could use it to ground trailer wiring to a frame. Sometimes aluminum trailer frames aren't quite adequate so you may need to run a jumper wire to the main ground wire of the…

When installing The etrailer Hitch #e95ZR onto your 2023 Hyundai Palisade, it does require some fascia trimming but it is not too bad. When looking at the instructions box 3 while using a tape measure, marker, and utility knife measure, mark, and…

I checked with the manufacturer and the overall width of the etrailer hitch part #e95ZR that you referenced is 48.70 inches.

You do not need to remove the heat shield to install the Curt Trailer Hitch Receiver #C13427 on your 2021 Hyundai Palisade. Based on the picture you provided it looks like the hitch is pretty close to the heat shield, but you can use the handle end…

We have a couple options on trailer hitches that are confirmed for your 2023 Palisade, which are The Curt #C13427, and the etrailer #e95ZR The two hitches are indeed very similar but each hitch has something the other does not. The Curt Hitch #C13427…