Replacement 4-1/4 Long Idler Hub with 1 Bearings and 1.5 Grease Seal
Question:
Hello. I have an old boat trailer in need of a new hub. The axel is 3” long and is 1” in size and then the seal sits on a 1.5 inch axel. Picture attached the hub length is 4 and 1/4 inches long from end to end. Is there a hub here that will work for this axel?
asked by: Darrin
Expert Reply:
We do have a replacement for you with the Trailer Idler Hub Assembly # AKIHUB-440-2-G-2K. This uses inner and outer bearing # L44649 which has a 1.063" inner diameter and then a grease seal with a 1.50" inner diameter like you mentioned.
From the 4 bolts in the background I'm guessing you have a 4 on 4" bolt pattern just like this hub has. The only difference is that it looks like you put bolts through your hub each time whereas this idler hub already has bolts installed. This means that you will need to use the included coned lug nuts to secure each wheel.
Attached is a review video for this idler hub that you can check out as well as a list of our lug nuts that you can filter through.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-2K
- Article: Most Popular Wheel Bearings
- Search Results: l44649
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Video: etrailer Trailer Idler Hub Assembly Review AKIHUB-440-2-1K
- Search Results: carlisle
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Search Results: bearing packer
- Search Results: 4.8 x 12 trailer tires
- Q&A: Is AxleTek Idler Hub Available Without The Race
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Search Results: marine grease
- Search Results: grease
- Video: Performance Tool Plastic Bearing Packer Review
- Video: etrailer Trigger Latch Channel Tongue Trailer Coupler Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-1K
- Q&A: 4.80-12 Trailer Tire with 81 MPH Speed Rating
- Q&A: Is there a 12 Inch Trailer Tire that is Rated for 80 Miles Per Hour
- Q&A: Picking Out Replacement 1996 Starcraft Spaceflyer 1221 Hub
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: Trailer Hub Inspection Demonstration
- Q&A: How to Determine if the Grease Cap for a Hub
- Search Results: castle nut
on Trailer Hubs and Drums
