Trailer Idler Hub Assembly For a 1" Diameter Spindle That is 4-1/4" Long
Question:
I have an old boat trailer that needs a new hub and bearings.I am thinking that AKIHUB-440 -2-G-2K would work. The spindle ,which has a one inch diameter, is 41/4 inches long including the the threads which are one inch long. Is this spindle long enough to accommodate the hub in the package mentioned above
asked by: Don R
Helpful Expert Reply:
It sounds like you are needing the Trailer Idler Hub Assembly # AKIHUB-440-2-G-1K for your trailer. This hub fits the BT8 Spindle # TRU59FR which is 1" in diameter and has a length of 4-1/4" long from the inner bearing landing to the end of the threads.
The Idler Hub Assembly # AKIHUB-440-2-G-2K you found fits a BTR Spindle # TRU44FR which has a diameter of 1.063" for the hub bearings.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Search Results: grease
- Search Results: marine grease
- Video: Performance Tool Plastic Bearing Packer Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-2K
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Search Results: wentzville mo
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Q&A: Recommended 56" Long Trailer Axle with 4-Lug Hubs
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Q&A: Replacement 4-1/4 Long Idler Hub with 1 Bearings and 1.5 Grease Seal
- Q&A: How to Install Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Q&A: Replacement Axle for Gheenoe Light Canoe Trailer
- Q&A: Is there a 12 Inch Trailer Tire that is Rated for 80 Miles Per Hour
- Q&A: Recommended Galvanized Hubs Assemblies With 4 Bolts For Boat Trailer
- Search Results: 25mm hub
- Search Results: spindle
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30153 Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-EZ-1K Review