Picking Out Replacement 1996 Starcraft Spaceflyer 1221 Hub
Question:
What is the correct replacement hub and spindle for my 1996 Starcraft Spaceflyer?
asked by: Greg
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: etrailer Trailer Idler Hub Assembly Review AKIHUB-440-2-1K
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Article: Most Popular Wheel Bearings
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-2K
- Search Results: bearing packer
- Search Results: 8 91a hub
- Search Results: 5.30 x12 tire
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: Replacement Hubs for a 2001 Forest River RV Flagstaff Folding Pop-Up Camper
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Recommended 5.30-12 Tire and Wheel Combo for 2001 Skamper Tent Trailer
- Q&A: Replacement Tire/Wheel Needed with 4 Bolt Pattern for a 1995 Dutchmen 1203
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: Trailer Hub Inspection Demonstration
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Trailer Hitch
- Video: Trailer Hitch Installation - 2006 Dodge Grand Caravan - Curt
- Video: Trailer Hitch Installation - 2006 Chrysler Town and Country - Curt 13389
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: 17580d13
- Search Results: escort trailer parts