How Long are Curt Round Bar Spring Bars
Question:
How long are the spring bars that come with c17050? I have a pop up that doesn’t have an opening on the frame for the brackets until about 35 inches away from the hitch ball. Can I mount the brackets about 35 inches away from the ball with this spring bar?
asked by: Dan
Expert Reply:
I spoke with Curt and spring bars of the WD system # C17150 has an overall length of 30-5/8 inches and the diameter is 1-1/4 inches where it fits into the head. The length is measured from the center of the end that fits in the head to the center point between the holes of the small u-bolt that chain attaches to.
So what you can do hopefully is install a set of bolt on brackets like the part # C17005 to the frame where the spring bars need to be which allows you to bypass the interference issue you have.
Products Referenced in This Question
Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- CURT
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- 500 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Shop: 2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Shop: Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Shop: Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 6K GTW, 600 TW
- Q&A: Can You Reverse with the 6K Curt MV Weight Distribution System
- Q&A: Weight Distribution System Capable Of A Weight Capacity Of 6,000lbs And A Tongue Weight Of 600lbs
- Q&A: How to Install Spring Bars Using Bolt On Brackets for a Curt Weight Distribution System
- Q&A: Chain Hanger Recommendations for Trailer with Propane Tank and Curt Weight Distribution System
- Q&A: Weight Distribution System for Boat Trailer That Installs 32 Inches Back from Coupler
- Q&A: Where On Trailer Frame Does Spring Bar Hanger for Fastway Weight Distribution Install
- Q&A: Do You have to Use the Trailer Jack to be Able to Attach Spring Bar Chains to Chain Hangers
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Video: Review of CURT Weight Distribution Hitch - MV Weight Distribution System - C17050
- Video: Blue Ox 2-Point Weight Distribution with Sway Control Installation - 2013 Ram 1500
- Video: Curt Weight Distribution C17008 Review
- Video: Review of Reese Weight Distribution Hitch - 6K WD With Sway Control - RE34FR
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Trailer Hitch
- Search Results: weight distribution hitch
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
- Shop: Trailer Wiring
- Search Results: 2 5/16 ball
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Video: B&W Continuum Weight Distribution System Review
- Article: How to Measure for Trailer Hitch Drop
- Search Results: 90160
on Weight Distribution Hitch
