Chain Hanger Recommendations for Trailer with Propane Tank and Curt Weight Distribution System

Question

Question:

Hi, These brackets are a good solution for my A type frame in my Rockwood Premiere that I cant fit a regular WDH bracket as it has a propane tank and battery support in it. Im wondering if this strong enough to install my 400-600 WDH spring bars to support my 450lbs TW trailer? Please let me know if you need more information. Thanks!

asked by: Marc

1

Helpful Expert Reply:

The Curt Chain Hangers for the Curt Weight Distribution Systems would be exactly what you need for your A-frame trailer that does not have clearance above the frame rail because of your propane tank and battery support.

I can also assure you that these hangers have more than enough capacity for you 400-600 lb rated spring bars.

expert reply by: Jameson C

1

Answer 1

You are doing it correctly. The only way to get the proper tension on/off the spring bars when using chain hangers #C17005 is to use the trailer jack. This often means that you have to lift up the trailer/truck a good amount before you can attach…

view full answer...

Answer 2

Assuming you're talking about the length of your shank being 16" long, then no the length of your shank will not affect the capacity of your weight distribution system. That being said, if you're looking for a complete system…

view full answer...

Answer 3

I spoke with Curt and spring bars of the WD system #C17150 has an overall length of 30-5/8 inches and the diameter is 1-1/4 inches where it fits into the head. The length is measured from the center of the end that fits in the head to the center…

view full answer...

Answer 4

The first step in choosing a weight distribution system is to conclusively determine the tongue weight of your camper once it is fully loaded and ready to tow. This includes full water and propane tanks plus any other gear you would typically…

view full answer...

Answer 5

In order to use a chain style weight distribution system on a trailer with a frame rail that is 4" wide, you are going to want to install a set of bolt-on chain hanger brackets like part #C17005. These brackets work with most chain style spring…

view full answer...

Answer 6

The Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW #RP58393 requires positioning on trailer tongue approximately 29 inches back from hitch ball. The Reese Steadi-Flex Weight Distribution System w/ Sway…

view full answer...

Answer 7

The Curt MV Weight Distribution System part #C17050 does not have sway control so reversing is not as big of an issue although the trailer still needs to remain relative straight. If you need to turn and backup it is recommend to unhook the spring…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

view full answer...

Answer 11

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 12

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Chain Hanger Recommendations for Trailer with Propane Tank and Curt Weight Distribution System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching