Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed for use on your open, flatbed trailer, this all-inclusive rack holds 1 backpack blower; (1) 3- to 5-gallon, round cooler; 1 trimmer line spool; and up to 6 shovels. Pre-drilled towers ease assembly.
Features:
Note: Does not include trailer mounting hardware. Hardware in kit is for assembling the rack frame and equipment holders. Requires 4 (Grade 8) bolts, 4 washers, and 4 nylon locking nuts (not included) for mounting the rack to your trailer
Backpack Blower Holder
The backpack blower holder is designed to securely grip your blower at its grab handle. Simply hang your blower from the hook and then fold down the integrated steel arm. Once the arm is properly positioned over the hook, you can lock it in place with a padlock (sold separately).
If you have a STIHL 420 backpack blower, you will need to use Pack'Em adapter PA-STIHL420 (sold separately). A different adapter, PA-STIHLECHO, is required if you have a STIHL 550, STIHL 600, ECHO or RedMax blower.
Cooler Holder
The beverage cooler rack consists of a steel frame that supports the weight of a cooler and two adjustable straps to hold it in place. This rack is designed to hold a three- to five-gallon, round cooler or pesticide sprayer.
Trimmer Line Holder
The line holder can hold a three- to five-pound spool of trimmer line. Just slide the spool onto the center rod of the holder and then hook the rod back in place. Now your trimmer line is securely stored and easily accessible for quick, painless unwinding directly from the spool.
Shovel Holder
The shovel holder allows you to carry up to six straight-handle shovels, rakes or brooms. Simply slide the tools into both the top and bottom holes of the rack and you're good to go.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
This is our test course, let's start with the slalom. This shows side to side action such as turning corners or evasive maneuvering. Then onto our alternating speed bumps. This shows twisting action, such as hitting curbs, potholes, road debris or uneven pavement. Last of all, the solid speed bumps. This shows up and down action such as driving through a parking lot, or parking garage or driving in and out of the driveway..
Average Customer Rating: 4.1 out of 5 stars (12 Customer Reviews)
Designed for use on your open, flatbed trailer, this all-inclusive rack holds 1 backpack blower; (1) 3- to 5-gallon, round cooler; 1 trimmer line spool; and up to 6 shovels. Pre-drilled towers ease assembly.Unlike the advertised picture here at etrailer I decided to mount the cooler and blower on the inside. As a result it's harder to get tools into the first and last slots. Overall it's a nice setup. Was able to install in the dark of night using a flashlight, so not much to it. Does not include trailer mounting hardware. I called to confirm the included hardware is only for the frame.
My first impression was it looks great/sturdy etc. Installing it wasn’t too bad , but actually using it was a different story. Had a hard time getting hand tools out of sleeved holes. Had to cut with a razor blade the ends of the rakes ( the rubber grip ends ) . So that took some time as I was on a job, and also don’t have grips on some of my tools. They were getting stuck in the gromets as I would pull them up. Any ways cool rack still just had to deal with that and make do with what I spent [price] on. Also be cool if the weed whacking string didn’t fly every where getting tangled. Prob could have crafted something to keep that from happening ...
It's ok... The rubber bumpers in the holes for the hand tools come out every time we pull a tool, and the one cross bar weld (the top one where the tools go in first) broke a few months ago. Trying to make it to the end of season so we can take it down and have it rewelded somewhere.
works great for the backpack blower. the straps sun bake fast and snap. lost a cooler that way. the rest of the rack has been working great though! just replace the straps with higher quality ones from [store] and you're smooth sailing.
Good product but water cooler holder straps broke due to dry rot not long after purchase. So I am unable to use the water cooler.
Simple design and easy to install. Delivery was fast as well! The only downside is that there are no bolts included to attach to trailer. (Could have been stated in the description) This is to be expected though since all trailers will differ. Completely satisfied.
This is a great product. It's sturdy and easy to install. It really cleaned up my trailer. Also etrailer is great. They had great communication and fast shipping. A+ all around.
Makes trailer alot more neat plus better for equimpment. also very fast shipping
Works great. Strap for cooler dry rotted from sun in 6 months. Other than that I would give it 5 stars
Very nice and easy set up. Quick delivery. Priced great
Very nice rack is very strong. It shiped quick and with no problems.
Do you have a question about this Backpack Blower Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
8/12/2022
I see that this order was placed last year. I have contacted the manufacturer and they have confirmed that this item has a one-year warranty. So, unfortunately, we will not be able to cover this under warranty.