Parts Needed to Flat Tow 2017 Ford Explorer

Question

Question:

Will these parts work for my vehicle: Blue Ox base plate BX2668, Blue Ox Alpha tow bar BX7380, RM15267 wire kit, RM766 battery disconnect, Blue Ox BLU37TR supp brake system, RM9332 12v outlet kit, seat stiffener BRK2503? Likely will need a dual hitch adapter 6inch RM 077-6 for flat towing and kayak/bike carrier but not sure of the proper length yet. Any other parts needed?

asked by: Chuck S

0

Expert Reply:

Yes, the parts you mentioned are the correct parts you need to flat tow your 2017 Ford Explorer. The base plate kit part # BX2668 is the correct kit for your vehicle, the Alpha tow bar part # BX7380 is a fantastic option that you'll really like as it has non-binding arms and is very easy to use.

The Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 is a great kit too for wiring as it allows you to control the taillights of the vehicle with the motorhomes trailer wiring and does not require cutting into the taillight housings.

The Blue Ox Patriot part # BLU37TR is very easy to use and setup with the seat stiffener # BRK2503. You will also need the outlet kit # RM-9332 since the battery needs to be disconnected.

Most likely you will need a high low adapter too like the part # RM-077-6 so that the tow bar will sit level. I attached a page that shows how to pick the one you'd need out as well.

expert reply by: Jameson C

0

Answer 1

Since the receiver height and the base plate height of the vehicle is the same, you won't need to worry about keeping the tow bar level. If your bike rack has an angled shank with a couple inches of rise to it, you could use the #RM-077-6. If…

view full answer...

Answer 2

I do have a solution for you to carry your bikes and use your tow dolly but the Roadmaster Dual Hitch Receiver Adapter part #RM-077-6 which is what I think you have cannot be used with any other sort of adapter. That said, you could use the Curt…

view full answer...

Answer 3

Thanks for the pictures! We do have a different style ratchet option for your older tow dolly but you will need to measure the size of the bracket on your current ratchet. The most likely option we have is the Replacement Left Side Ratchet Winch…

view full answer...

Answer 4

I spoke with my contact at Demco and they offer three different sizes for the replacement wheel straps for their Kar Kaddy. For standard you would want the #DM03528, for small #DM03528-81 and for large #DM03528-93. It sounds like you are looking…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hello Steve. I do have a good solution for you, but I cannot recommend using the Malone Adapter #MPG544. Since it is rated for towing only 4,000 lbs, your 8,000 lb towed vehicle would be double the max towing capacity. You are right about there being…

view full answer...

Answer 8

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 11

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 12

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Parts Needed to Flat Tow 2017 Ford Explorer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching