Trailer Wiring Harness Recommendation for 2019 Honda Odyssey

Question

Question:

I purchased and installed the wiring kit for a Honda Odyssey. Can I use it with my odyssey 2019 or do I need another or different one

asked by: David S

0

Expert Reply:

There was a big enough change between the 2017 and 2018 Honda Odysseys that Tekonsha and the other trailer wiring manufacturers had to come up with a new design. That means that the kit you have from your 2015 model would not fit and you'd need the part # 118753 for your 2019 Odyssey. I attached an install video for this kit for you to check out on a similar 2018 model as well.

expert reply by: Jameson C

0

Answer 1

I recommend using the Anti-Rattle Trailer Hitch Receiver Lock #63232, this lock utilizes the spring and threaded block on the inside of the ball mount or accessory and the pin is threaded to secure with a socket or wrench to pull the shank from the…

view full answer...

Answer 2

I do agree that the Tekonsha Wiring harnesses are the way to go. They tend to be the longest lived of the harnesses we offer, but the #118753 and #118781 for your 2022 Honda Odyssey definitely make it a little confusing. However, I am here to…

view full answer...

Answer 3

The tongue weight of a trailer depends on the size of the trailer and how it is loaded. Typically, the tongue weight is 10 to 15 percent of the weight of the trailer in its fully loaded ready-to-tow condition. You can use a tongue weight scale like…

view full answer...

Answer 4

The big difference between the two Tekonsha trailer wiring harnesses that fit your 2019 Honda Odyssey is how they draw power to activate the trailer lights. The #118753 has a wire that runs up to the vehicle battery which is used to power all of the…

view full answer...

Answer 5

There are currently three trailer wiring harnesses available for your 2019 Honda Odyssey; the Curt T-Connector Vehicle Wiring Harness part #C56382, the T-One Vehicle Wiring Harness with Upgraded part #118781, and the T-One Vehicle Wiring Harness with…

view full answer...

Answer 6

Both the #118781 and the #118753 are indeed confirmed to fit the 2018-2020 Honda Odyssey, both use T-connectors to plug into your tail light connectors, and both are rated at 5 amps for the stop/turn circuit and 7.5 amps for the tail light circuit.…

view full answer...

Answer 7

I'm sorry to hear that. As for the questions you have we can get some good solutions for you. For hitches the etrailer Trailer Hitch Receiver part #e98855 is a good choice. It has a 525 pound tongue weight rating and a 3500 lb. gross trailer…

view full answer...

Answer 8

With a minivan, the hitch tongue weight clearance and its ground clearance are the two main things you'll need to contend with regarding using hitch mounted accessories. The Curt Class III receiver, part #C64NR features a crossbar that is mainly…

view full answer...

Answer 9

The biggest difference between the Curt Trailer Hitches, #C64NR and the etrailer #e98855, is the #C64NR hitch sits up closer to the bumper which will give you a little more clearance between the bottom of the hitch and the ground. The Curt #C64NR is…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...