Review of CURT Front Receiver Hitch - Custom Fit Front Mount Trailer Hitch Receiver - C31083 Video

For your 2024 GMC Sierra 3500 we only have the Curt front hitch part #C52NR as a confirmed fit. When this hitch is installed it hangs below the front bumper like what you can see in the attached picture.

For your 2017 Ford F-150 you can use the Curt Front Mount Trailer Hitch Receiver #C31083 for a front mount hitch. This hitch has a 2" receiver opening, a 500 lb vertical load rating, and a max capacity of 5,000 lbs. This hitch will also…

For your 2018 Ford F-150 I recommend the Curt Front Hitch #C31083 because it's make in the USA, is easy to install, and has plenty of capacity at 9,000 lb line pull. In case you were looking for a plow too I attached a link to this page that…

The good news is that neither the Curt #C31083 or the Draw-Tite #65067 front mount trailer hitches will reduce the ground clearance on your 2018 Ford F-150. If you want a receiver that sits above the lowest piece of fascia then the Curt requires…

On your 2020 Ford F-150 the Curt Front Mount Trailer Hitch #C31083 will sit further up than the Draw-Tite alternative and actually won't affect the truck's ground clearance at all. The 2" receiver on the hitch will protrude…

I have included some pictures of Curt Front Mount Trailer Hitch Skid Shield #C31007 for you. The overall height of the skid plate is 4-1/4 inches, overall width is 4-7/8 inches. The overall length of the unit end to end is approximately 8-3/8…

For your 2020 Ford F-150 XLT the best front mount hitch is the Curt #C31083 because it's going to sit just a tad higher than the Draw-Tite alternative for better ground clearance. The 2" receiver for the Curt hitch will actually…

Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.

The air dam has to be permanently removed on a 2011 and newer For F-150 to install Curt front mount hitch receiver #C31068. Installation on your 2012 F-150 will be basically identical to the 2014 model in the video I have linked showing an example…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Curt Front Mount Trailer Hitch #C31083 and the Draw-Tite #65067 are extremely similar hitches that are both confirmed to fit your 2018 Ford F-150. Both hitches will mount to the same locations on the truck's frame and feature identical 500…

The Draw Tite part #65067 will sit lower to the ground than the Curt hitch part #C31083 which is also a fit for your 2016 Ford F-150. The Draw Tite requires you to notch a couple inches out of the bottom of the air dam up front, but the Curt requires…