Replacement Velcro for Lund Tonneau Covers

Question

Question:

I have a Lund tonneau cover that needs new Velcro on the rails. The Velcro measures 11/2 inches wide and the truck is a short bed Tacoma. Can you help. Thanks

asked by: Don

0

Expert Reply:

Although we do not carry Lund tonneau covers or their replacement parts we do have velcro strips that are 1-1/2" wide in the Replacement Velcro Strip part # A30474. The velcro is 17" long which should be more than enough for your 2009 Toyota Tacoma. It is designed to be used with Access tonneau covers but that is not to say it cannot be made to work for you.

expert reply by: Conner L

0

Answer 1

I pulled the Replacement Velcro Strip, part #A30474 from the warehouse and opened the package to see how it is attached. This is designed to replace the hook side of the velcro fastener on Tonneau covers. Per the instructions you would drill out…

view full answer...

Answer 2

The Replacement Velcro Strip for Access Tonneau Covers - 1-1/2" x 17' #A30474 is made for Access tonneau covers, but that it is not to say that it cannot be used on your Lund Rollup L96092. We do not carry any Lund tonneau covers or…

view full answer...

Answer 3

We do have our Trailer Hitch Receiver Reducer Sleeves #e33YR which includes a 3" to 2-1/2" reducer and 2-1/2" to 2" reducer. These can be used individually or together if you need to go from a 3" to 2" receiver. We do…

view full answer...

Answer 4

I have an answer for you. Unfortunately, we do not carry Gator-brand tonneau covers, so we will not be able to confirm for sure if our replacement replacement Access Velcro strips will fit your tonneau. However, judging by your attached picture and…

view full answer...

Answer 5

You can use the Replacement Truxedo Shur-Bond Velcro Brand Fastener for 8' Beds - 1" Width #TX1117877 which is the width you need and can be cut to length. It doesn't have the adhesive back but rather fits in the groove of the rail.

view full answer...

Answer 6

We have replacement tonneau cover Velcro that is exactly 1-5/16 inches wide with the Truxedo part #TX1115174 which would fit your rails. It can be cut down shorter too as it is 80 inches long.

view full answer...

Answer 7

The Replacement Cover for TruXedo TruXport Soft, Roll-Up Tonneau Cover #TX259101-CVR that you referenced is not a fit for your 2008 Chevrolet Silverado. That product fits part #TX259101 for 1999 - 2007 Ford F-250 and F-350 Super Duty with a 6-3/4…

view full answer...

Answer 8

The only difference between the Access Replacement Velcro Strips #A30474 and #A60270 is that A30474 is 1-1/2 inches wide and A60270 is only 1 inch wide. They are both 17 feet long and come with the 4 screws to help keep them in place.

view full answer...

Answer 9

The part #A60270 is 1 inch wide and because of that should work with an adhesive securing it when used in conjunction with the included self tapping screws. I would go with a weatherproof sealant like the part #0160299.

view full answer...

Replacement Velcro for Lund Tonneau Covers

Product Page this Question was Asked From

Continue Researching