Choosing Between Class II and Class III Hitch for 2018 Mazda CX-5

Question

Question:

so why would I choose a class 2 hitch over a class 3 or vice versa?

asked by: Lance

0

Expert Reply:

When a choice of hitch classes is available for any vehicle we always recommend going with the higher-capacity option since the cost is usually about the same. You can refer to the linked hitch article for details about the various types of hitches offered.

In the case of your 2018 Mazda CX-5 we have both 1-1/4-inch Class II hitches like Curt # C12170 and 2-inch Class III hitches. I recommend the 2-inch Class III Draw-Tite hitch # 76138 since it has the highest weight capacity, the best compatibility with accessory items like bike racks and cargo carriers and because it offers no-drill installation. Photos of both hitches are included.

You can refer to the linked installation video and written instructions. The video will show installation on a 2017 CX-5 and the written instructions will provide a list of the tools needed to mount the hitch.

The Draw-Tite hitch's 675-lb tongue weight rating means that you can safely use a high-capacity hitch cargo carrier like Curt # C18151 or even a multi-bike hitch bike rack like the Kuat platform style 4-bike NV rack # NV22G-NA22G.

expert reply by: Adam R

0

click to enlarge

Answer 1

I did some research on the internet and found that some of the bolts may be behind plastic tabs on your 2007 Mercedes-Benz ML350. The rear bumper may also have safety cables attached to the rear mud flaps. You will also have to remove a center…

view full answer...

Answer 2

For your 2016 Mazda CX-5 or even the 2016.5 mid-year refresh model then you can use the following trailer hitches: #76138 (I recommend this hitch) #C13315 #C12170 I have linked a video showing an example installation of hitch #76138. If you plan on…

view full answer...

Answer 3

We have everything you need to tow your small trailers with your 2016 Mazda CX-5. I have listed all of the parts that I recommend below. Class II Trailer Hitch - #C12170 4-Flat Wiring Harness - #118563 Adjustable Ball Mount - #MT70068 Hitch Ball -…

view full answer...

Answer 4

Bike racks that are used on a Class I trailer hitch receiver are only allowed up to 2 bikes. This is because the additional force from weight being extended out from the vehicle is too much leverage for the vehicle to handle and could cause damage…

view full answer...

Answer 5

None of the trailer hitches for the 2016 Mazda CX-5 require any cutting or trimming of the fascia. The instructions for the hitches are linked on their product pages for you to take a look at. For a hitch to use with a bike carrier I recommend…

view full answer...

Answer 6

We have a hitch solution that will work well on your 2017 Mazda CX-5 but the brand Hidden Hitch actually was discontinued so that is why it's not listed as a fit for your vehicle. The Draw Tite hitch part #76138 is a fit for your vehicle and…

view full answer...

Answer 7

The instructions for Curt trailer hitch #13342 are linked on its page, below the description, and on this page, also below. If you plan on doing some towing I recommend etrailer ball mount kit #989900. It comes with 2 ball mounts; one with a 3/4 inch…

view full answer...

Answer 8

We apologize for the confusion, but yes the Curt hitch part #C12170 is a fit for the 2016 early and late models like what you have. We may have it listed confusing on our site but I attached a picture that shows our fitguide showing it as a for the…

view full answer...

Answer 9

Yes, I checked with Draw Tite and the hitch part #76138 that you referenced is a confirmed fit for your 2017 Mazda CX-5. We have install pics for it on the 2016 model which it also fits, but haven't had the chance to install it on a 2017.

view full answer...

Answer 10

Both hitches share the same basic design and the same capacity, but I'd personally choose the Curt #13342 over the Draw-Tite #75376 because I feel that Curt does a better job with their powder coat finish. To realize the full capacity of the…

view full answer...

Answer 11

Yes, the Draw Tite hitch part #76138 is a confirmed fit for your 2016.5 Mazda CX-5. This hitch actually fits both the early and late model 2016 CX-5 models.

view full answer...

Answer 12

For your 2016 Mazda CX-5 I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76138 due to it having a 2" receiver which will give you many more options when it comes to accessories like a bike rack,…

view full answer...

Choosing Between Class II and Class III Hitch for 2018 Mazda CX-5

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching