Does Draw Tite Hitch 76138 Fit 2016.5 Mazda CX-5

Question

Question:

I see the Mazda CX-5 2inch Trailer hitch for 2016 is 76138. Will this also fit a 2016.5 model in the CX-5 the car I own?

asked by: Jeff S

1

Helpful Expert Reply:

Yes, the Draw Tite hitch part # 76138 is a confirmed fit for your 2016.5 Mazda CX-5. This hitch actually fits both the early and late model 2016 CX-5 models.

expert reply by: Jameson C

1

Answer 1

I did some research on the internet and found that some of the bolts may be behind plastic tabs on your 2007 Mercedes-Benz ML350. The rear bumper may also have safety cables attached to the rear mud flaps. You will also have to remove a center fascia…

view full answer...

Answer 2

We apologize for the confusion, but yes the Curt hitch part #C12170 is a fit for the 2016 early and late models like what you have. We may have it listed confusing on our site but I attached a picture that shows our fitguide showing it as a for the…

view full answer...

Answer 3

For the installation of the Draw-Tite Trailer Hitch, part #76138 the muffler is very easy to remove. You just remove the two fasteners at the rear of the muffler and the 2 fasteners on the exhaust pipe going into the muffler and you can get the…

view full answer...

Answer 4

We have a hitch solution that will work well on your 2017 Mazda CX-5 but the brand Hidden Hitch actually was discontinued so that is why it's not listed as a fit for your vehicle. The Draw Tite hitch part #76138 is a fit for your vehicle and…

view full answer...

Answer 5

Bike racks that are used on a Class I trailer hitch receiver are only allowed up to 2 bikes. This is because the additional force from weight being extended out from the vehicle is too much leverage for the vehicle to handle and could cause damage to…

view full answer...

Answer 6

Yes, I checked with Draw Tite and the hitch part #76138 that you referenced is a confirmed fit for your 2017 Mazda CX-5. We have install pics for it on the 2016 model which it also fits, but haven't had the chance to install it on a 2017.

view full answer...

Answer 7

For your 2016 Mazda CX-5 I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76138 due to it having a 2" receiver which will give you many more options when it comes to accessories like a bike rack,…

view full answer...

Answer 8

You will not have to do any trimming or cutting on the bumper fascia to install the Curt Class III Trailer Hitch, #13342, on your 2008 Mercedes-Benz ML350, however, you will have to drill 2 holes through the trunk pan and do a little trimming on it…

view full answer...

Answer 9

When a choice of hitch classes is available for any vehicle we always recommend going with the higher-capacity option since the cost is usually about the same. You can refer to the linked hitch article for details about the various types of hitches…

view full answer...

Answer 10

I've attached a video of the installation of the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76138. In the video our installer uses a 6 inch extension but he does reference that you can use a swivel socket…

view full answer...

Answer 11

It's a warranty situation for the Curt hitch. It's not that the Draw Tite is necessarily stronger than the Curt it's just that they approach the idea of carrying a non-supported load more cautiously than Draw Tite. The only thing is that…

view full answer...

Answer 12

Both hitches share the same basic design and the same capacity, but I'd personally choose the Curt #13342 over the Draw-Tite #75376 because I feel that Curt does a better job with their powder coat finish. To realize the full capacity of the…

view full answer...

Does Draw Tite Hitch 76138 Fit 2016.5 Mazda CX-5

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching