Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
(81 reviews)
Price: $186.15
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # C12170
Retail:$280.95
Our Price: $186.15
You Save: $94.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (81)
- Q & A (0)
- Photos
CURT Trailer Hitch - C12170
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- CURT
- 350 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Limited lifetime warranty
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
12170 Curt Class 2 Trailer Hitch Receiver
Replaces 12080
Installation Details
This Product Fits The Following Vehicles
- 2013 - 2024 Mazda CX-5
- 2016 - 2016 Mazda CX-5 2016.5 mid-year model
- 2019 - 2019 Mazda CX-5 excluding Diesel
- 2016 - 2016 Mazda CX-5 prior to 2016.5 mid-year model
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C12170
Average Customer Rating: 4.8 out of 5 stars (81 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Eric07/25/2023
2023 Mazda CX-5
Unfortunately, my otherwise reliable friend decided to elope earlier this month, and will be gone until late July. So, I set about installing this Curt C12170 by myself, slowly and carefully. My CX-5 is brand new; I was very careful. I used the Lisle muffler removal tool and silicone spray. (Don’t buy a cheapie muffler tool – they snap. Go for the Lisle or better). After two days, I gave up. I made it to Step 7, but lifting the receiver into position is a two-man job. I could not lift it, move the electrical wires out of the way, and pull the bumper cover back all by myself. The Good News: My nephew dropped by July 13 and helped me install the hitch receiver. It took us about 20 minutes to lift the receiver into position, fish the bolts through, and put the front bolts into the frame finger tight. It took me another 45 minutes to tighten and torque the hardware, zip tie the electrical cables, and rehang the muffler.
Now that it is installed, it looks great. I have mounted a Draftmaster trike rack and they function well together.
by: Bsmith04/20/2024
I managed to complete the install without drawing blood!
I installed it without help and without the cx5 off the garage floor. It wasn’t as easy as it would have been with a helper but I got it.
All the holes aligned perfectly and all the bolts were exact.
Now I need the wiring harness which I thought came with the hitch I ordered but not so. I’m sure I read things wrong or simply ordered the wrong one.
by: Clint 03/09/2024
I'm a healthcare provider with minimal mechanical experience and was able to follow the videos and instructions to complete the installation without issue. The hitch on my 2016 CX-5 has towed my 16' aluminum boat well and I couldn't be more satisfied.
by: Daniel07/16/2020
2015 Mazda CX-5
Pretty straight forward installation. A little maneuvering required and minor interpretations to directions depending on vehicle year. This is on a 2015 Mazda CX-5 and will be used for a bike rack and luggage rack. Very pleased with my purchase.
Daniel
7/17/2021
Still going strong. I has been used with a cargo carrier and regularly carries a bike rack.
by: Richard W12/02/2023
2024 Mazda CX-5
I just bought a 2024 Mazda CX5 Premium. I was going to have the dealer install the Mazda Class I hitch. The hitch and wiring installation cost was going to run over $1100 + tax. I had installed a similar hitch from etrailer 10 years ago on my Chrysler 200. That install went smoothly so I figured I'd do it again. Ordered the class II a few days ago and it showed up yesterday. Installed it today. At age 70 and installing this thing solo definitely took longer than I anticipated. I had to be creative in the process but the end result is terrific. etrailer provides exact fit hitches that look great, out of the box and after installation. I am thoroughly pleased with the service and products from these folks. Two thumbs up to your company.
by: EJM04/15/2024
2023 Mazda CX-5
This is a very nice hitch & the directions were very good. But it took me at least 2 hours to install. The hardest part was getting the holes lined up and the carriage bolts through. It's possible that I didn't have all of the tape cut away so threading it through the hole was difficult.
by: RB09/10/2023
Purchased this specifically to mount a platform bicycle carrier on a Mazda CX-5. I did not install it myself so cannot speak to the ease of install, but I have had no complaints as a user over the past year.
by: Bill W. 07/18/2018
2017 Mazda CX-5
First time self installer without professional equipment (car lift, power tools, etc.) should anticipate more than 20-40 minutes installation time. Well built, quality product that fits perfectly. I ordered the hitch through their customer service. Vanessa was very knowledgeable, answered all my questions and was helpful in making the right choice. The hitch arrived promptly. The etrailer video installation instruction was very helpful which I followed over the factory instructions. I installed the hitch in my garage, on the floor and by myself which took about 90 minutes. I would recommend having a helper which would likely reduce the installation time.
by: Brad08/09/2020
My order came quickly via UPS; the package was in good condition at delivery. The hitch was packaged carefully and all the parts were there. The instructions were complete but could have had more clearer illustrations that were easier to read. The install wasn't difficult and I was able to do it in an hour with a set of extra hands. Overall, the product is well made and worth the money spent. I also purchased a Tee wiring harness. I either missed the description or it wasn't there but a note about whether you need a POWERED or unPOWERED connection depending on your needs would have helped. I fortunately purchased the correct one.
by: Mark 06/29/2023
Very pleased with the look and quality of the trailer hitch receiver from Trailer. The hitch was delivered 2 days after I placed the order. Etrailer earned my future business as they were very professional and responsive.
by: Emily 05/26/2023
2021 Mazda CX-5
Fast shipping, fair prices, excellent customer service and fast response to messages. Website made it easy to find the perfect fitting hitch for my vehicle!
by: Nathan01/25/2023
The hitch arrived very poorly packaged with holes in nearly every side of the box. The hitch itself was covered in scratches and the corners that were hanging through the holes in the box were dinged with the coating worn through. It’s a shame because the hitch itself seems to be good quality but it was packaged very poorly with no padding. So much for having a corrosion resistant coating.
Jenny N.
1/28/2023
Thanks for reaching out. I will have Customer Service reach out to you about the scratches on the hitch. If the hitch is needed right away, I recommend touching up the hitch with a rust resistant paint like Rustoleum.
by: Roy08/11/2023
2023 Mazda CX-5
Fit perfectly. The step by step video guide is most helpful and I knew exactly what to expect before I started the job. Thanks for the help
by: Dustin07/21/2021
Quick install and good instructions. Fifth one I’ve done so far.
My CX-5 has the optional trim on the rear valence. I thought this might need to be removed based on comments about Grand Touring trim needing to be removed. It fit fine.
by: Frank 02/15/2023
2022 Mazda CX-5
I just installed this hitch on a Mazda 2023 cx5. It came just after lunch and my wife and I installed it in just little over an hour. Even though web page did not show it fitting a 2023 I checked with the Mazda dealer because I had the same hitch on a 2020 cx5 and they said no frame changed so I gave it a shot. No issues. I ordered it on Monday from trailer and install on Wednesday. Dealer is great to work with and their install video's are great.
by: Manny 06/02/2023
Mazda
Installation was a breeze. Fits perfect & looks good on my 2022 Mazda CX-5.
by: Lloyd 07/22/2023
The inside washers that had to be taped should have been welded on. Other than that A ok.
by: Gregg 11/19/2023
2013 Mazda CX-5
I went it well, Thank you!
by: Roy 11/30/2022
2016 Mazda CX-5
Very fast shipping and delivered earlier than expected. This hitch fits my 2016 CX-5 perfectly. Had it installed by one of the recommended installers. If you're from Orange county in CA, bring your hitch for installation to Taylor's Trim. Tell Bobby Roy sent you (I hope he'd remember me).
by: Robert B.06/04/2018
2015 Mazda CX-5
My Curt Hitch is perfect in fit, finish and application. It solves the
problem of transporting and launching a 15' Alumacraft fishing boat. etrailer's price and advice are better by far than others, and include
excellent instructions plus videos if needed. This is a well engineered
product sold by very detail orientated professionals. I can honestly
say that I'm thrilled to find etrailer and highly recommend them.
Robert D.
6/4/2019
Perfect ! Dont even notice it, till I use it !
by: William 08/31/2023
Mazda
Fit my Mazda cx-5 perfectly. Great service & website.
by: Francisco 08/31/2023
After a year it looks good as new. Awe some!
by: Eric06/11/2019
Hitch and other ordered products arrived quickly and in good condition. Hitch was carefully packaged to prevent damage. Well done. Have not had time to install yet and will be doing this solo. Install package looks very well thought out, instructions are clear, accurate, and well illustrated. Note: I ordered some etrailer brand rubber hitch plugs (one for another car with 1.25 inch hitch) and I think these are well worth the low cost to give the job a more finished look and maybe keep grit out of your hitch when you back into dirt piles. If possible, I will update review after the install. So far I've spent about an hour gathering tools, checking kit for completeness, and removing the tape from holes in frame. My car lacks the rear plastic strip that is on some CX5s. The forty minutes for novice install might be a tad optimistic unless that's just to toss up the hitch and bolt it, not counting related activities.
by: Bud 01/25/2021
Having had a Curt custom hitch on my previous vehicle, I ordered one for my new 2020 CX-5, expecting similar quality. As before, the installation instructions were clear and easy to follow. The hitch fit perfectly, holes lined up exactly where they needed to be, and the finish seems to be even better than my previous one, appearing to be a heavy, baked-on powder coating. After a year it still looks great and although I don't pull a trailer frequently, it's nice to have it there for when I do. I couldn't be happier with this product!
by: Richard10/25/2021
I installed this trailer hitch to my new 2020 CX5. It took about 2-3 hours to install the complete hitch and wiring. I followed the video on installation and how to wire. No special tool require other than a torque wrench. now you may think this was a long time to install. but I am older than 75. Great Hitch!
25
81
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Best Hitch and Cargo Carrier for a 2021 Mazda CX-5I would be happy to help you find a cargo carrier and set your 2021 Mazda CX-5 up with a new trailer hitch. We'll start out with your hitch, I recommend the EcoHitch Hidden Trailer Hitch Receiver item # EH68VR. This hitch is custom fit and bolts directly to your CX-5 with included hardware. It is our must subtle looking hitch after install and the sleek design leaves only the receiver visible. The crossbar is concealed behind the rear trim for a factory look. This hitch has a 2" receiver...
view full answer...
- What is the Difference Between the Curt # C12170 and Curt # C13315 for My 2021 Mazda CX-5?There are a few differences between the Curt Hitch - 1/4" # C12170 and the Curt Hitch - 2" # C13315 for your 2021 Mazda CX-5. First off, we need to consider the hitch opening sizes. The # C12170 has a 1-1/4 inch opening while the # C13315 has a 2-inch opening. This is important because the opening determines what accessory compatibility you will have (since accessories are compatible by hitch receiver sizes). This also contributes to the difference in weight capacity for both hitches. The...
view full answer... - Comparing Curt Trailer Hitch Receivers for 2020 Mazda CX-5The installation and fit of the two Curt trailer hitches that fit your 2020 Mazda CX-5 are exactly the same; I did a side-by-side comparison of the linked installation instructions and there is no difference at all between them. So the only difference is the size of the receivers: - 2 Inch Receiver: Curt Trailer Hitch Receiver # C13315 - 1-1/4 Inch Receiver: Curt Trailer Hitch Receiver # C12170 Between these two I highly recommend the Curt Trailer Hitch Receiver # C13315 with the 2 inch...
view full answer... - Trailer Hitch, Wiring, and Brake Controller for a 2015 Mazda CX-5There are some Class III trailer hitches available for your 2015 Mazda CX-5. The most popular option is # C12170. But even though the hitch is rated for 3,500 gross trailer weight, your CX-5 is only rated for 2,000 pounds (see the towing section in the owner's manual for additional information) so you will be limited to 2,000 pounds gross trailer weight and up to 300 pounds tongue weight. This works out since the trailer you are buying weighs less. Like you said, none of the hitches are...
view full answer... - Trailer Hitch Recommendation to Install Swagman XC-2 on 2017 Mazda CX-5For carrying the Swagman XC bike rack part # S64650 on your 2017 Mazda CX-5 I recommend the Curt hitch part # C12170 because it is the correct size for the rack, installs easily, is mostly hidden, and because it's priced great. I attached an install video for this hitch for you to check out as well.
view full answer... - Class II Hitch Availability for 2016 Mazda CX-5It's a warranty situation for the Curt hitch. It's not that the Draw Tite is necessarily stronger than the Curt it's just that they approach the idea of carrying a non-supported load more cautiously than Draw Tite. The only thing is that for your 2016.5 Mazda CX-5 there is only the Curt hitch part # C12170 that is confirmed as a fit so you would have to use the # 18050 with a bike rack. Realistically Draw Tite will eventually have a hitch fit for your vehicle, but at this time we are still...
view full answer... - Will the Curt Trailer Hitch Receiver # C12170 Fit a 2017 Mazda CX-5Yes, the Curt Trailer Hitch Receiver # C12170 that you referenced is a confirmed fit for your 2017 Mazda CX-5. I have attached a video of this hitch being installed on a similar 2017 CX-5 that you can use for a reference. If you let me know what you will be using the trailer hitch for, I can make some recommendations for you.
view full answer... - Replacement Hardware for a Receiver Hitch on a 2022 Mazda CX-5Yes, you are in luck the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" item # C12170 you were looking at fits Mazda CX-5's from 2013-2022. This isn't common for most vehicles. You are going to want to replace the hardware though. Those bolts are only recommended to be torqued down once. You will need the Replacement Hardware Kit for Trailer Hitches item # RHK. You just go to that page and insert the item number C12170 into the hitch model number box and purchase the kit....
view full answer... - What is the Difference Between the Curt # C12170 and # C13315 for My 2021 Mazda CX-5?When comparing the Curt Class II Hitch # C12170 and the Curt Class III Hitch # C13315, there are a few differences. The Curt # C12170 has a 1-1/4 inch receiver opening and is designed to fit 1-1/4-inch accessories (such as bike racks and cargo carriers). The Curt # C13315, on the other hand, has a 2-inch receiver opening and is designed to fit 2-inch accessories. Given that this is the case, the # C12170 has a maximum tongue weight of 350 pounds and a maximum gross towing weight of 3,500...
view full answer... - Trailer Hitch for 2016 or 2016.5 Mid-Year Model Mazda CX-5The best way for you to find out what model you have is to call your local Mazda dealer with your VIN and ask, but for the purposes of finding a trailer hitch that fits, you needn't worry. That's because the hitch I recommend, the Draw-Tite # 76138 will fit BOTH 2016 and mid-year model 2016.5 Mazda CX-5's. This is a Class III hitch with a 2" receiver and is a complete bolt-on installation. For wiring which will give you a 4-way connector and allow you to power your trailer's lights you...
view full answer... - Are There Special Instructions for Installing Hitch Signature Model 2021 Mazda CX-5There aren't any special instructions for installing hitches like the Curt hitch part # C12170 on a Signature model 2021 Mazda CX-5. I attached a link on this page to where you can find local installers to you as well.
view full answer... - 2 inch Trailer Hitch Recommendation for 2016 Subaru ForesterA 2 inch hitch is definitely the way to go for your 2016 Subaru Forester like with the Draw Tite hitch part # 76182 that is a confirmed fit. This will allow you to use your 1-1/4 inch hitch carrier or bike rack for this size hitch or a 2 inch hitch. You are also correct that 2 inch to 1-1/4 inch hitch adapters do use sleeve type adapters and not ones that end up extending the hitch out a significant amount like the # HT02.
view full answer... - What Piece Of Bumper Needs To Be Removed To Install Curt Trailer Hitch C12170 On 2019 Mazda CX-5 GT?There is a small plastic trim piece on the rear bumper of your 2019 Mazda CX-5 Grand Touring that will need to be removed to install the Curt Trailer Hitch Receiver # C12170 which you can see in the included picture that a customer sent in when doing this install, and in the included install video. This piece just pops in and can be removed by using a flat head screwdriver with no cutting required. Now when it comes to a bike rack all you will need to do is makes sure the rack you are...
view full answer...
- Which Curt Hitch Fits Early and Late Model Versions of 2016 Mazda CX-5At one point the Curt hitch part # C12170 wasn't confirmed as a fit for both the early and late model versions of the 2016 Mazda CX-5 but it recently has been confirmed to fit both.
view full answer... - What is the Difference Between the Curt Class II and Class III Hitch for 2017 Mazda CX-5Both Curt # C12170 Class II hitch and # C13315 Class III hitch custom designed to fit the 2017 Mazda CX-5. Both hitches are designed to fit up and behind the bumper of the CX-5. The main difference between these two hitches is the Class III hitch has higher towing and tongue weight capacities and a 2 inch hitch receiver opening. The Class II uses the 1-1/4 inch receiver opening. I recommend using Class III hitch because the 2 inch receiver opening will give you more options for hitch...
view full answer... - What is the Difference Between the Curt Hitches # C12170 and # C13315 for My 2021 Mazda CX-5? The first difference between the Curt Class II Hitch - 1-1/4" Hitch # C12170 and the Curt Class III - 2" Hitch # C13315 for your 2021 Mazda CX-5 is the fact that they have different hitch receiver openings. The Curt class II has a 1-1/4 inch receiver and the Curt class III has a 2-inch receiver. This is important to note when it comes to compatibility with accessories you wish to mount on your vehicle. The second difference is the weight capacity. The # C12170 has a maximum tongue weight...
view full answer... - Will Kuat Sherpa 2.0 Work With Curt 1-1/4 Hitch on 2020 Mazda CX-5Excellent questions, and I'll certainly get into the explanations, but let me start by just quickly saying that the set up you asked about is going to work beautifully; the Sherpa 2.0 and Curt hitch for your 2020 Mazda CX-5 are compatible and there are no clearance issues to worry about. That said, here are the part numbers for the hitch and Sherpa combo for your '20 CX-5: - Curt Trailer Hitch Receiver # C12170 - Kuat Sherpa 2.0 Bike Rack - Gray # SH12G or Black # SH12B The Curt hitch...
view full answer... - Is There a Trailer Hitch Receiver for a 2014 Mazda CX-5 Towing a 2,000 Pound BoatA popular trailer hitch for your 2014 Mazda CX-5 is the Curt Class-II # C12170. It will have a 3,500 pound towing capacity and 350 pound tongue weight capacity. I did some research on your CX-5 and it seems to have a 2,000 pound maximum towing capacity. I would double-check your owners manual because you will not want to exceed it. The custom wiring is # C56011 and ball mount kit I would go with is # 989891 (2 trailer hitch balls to fit different applications, ball mount with 3/4 inch...
view full answer... - Is the Curt Trailer Hitch Receiver # C12170 a Good Fit for a 2023 Mazda CX-5Yes, the Curt Trailer Hitch Receiver # C12170 is a good fit for your 2023 Mazda CX-5. But to be completely honest, you are better off going with the etrailer Trailer Hitch Receiver # e98902. The reason being that the Curt hitch provides a 1-1/4" hitch receiver and the etrailer hitch has a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories. From bike racks and cargo carriers to ball mounts. You can always adapt 1-1/4" hitch accessories to use...
view full answer... - Can 2018 Mazda CX-5 Tow Smaller Rental TrailerWith the Curt hitch part #C12170 installed on your 2018 Mazda CX-5 you could tow a smaller rental trailer like you referenced. It would be just a matter of staying under the weight capacity of the hitch and the vehicle which you'd need to verify in the owner's manual. For trailer wiring you'd want the part # 118746 which is a confirmed fit and our most reliable option. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball...
view full answer... - Best Curt Hitch for a 2021 Mazda CX-5You are correct that there are 2 choices for a Curt hitch for your 2021 Mazda CX-5. The Curt Trailer Hitch Receiver # C12170 and the Curt Trailer Hitch Receiver # C13315 are both made in the USA and feature a bolt-on, no-drill installation. The difference comes from the Class of hitch. The # C12170 is a Class II hitch that features a 1-1/4" receiver opening. While the # C13315 is a Class III hitch that features a 2" receiver opening which is the most common size used for hitch mounted accessories...
view full answer... - Recommended Trailer Hitch Receiver for 2017 Mazda CX-5 TouringYou're smart to want the flexibility of a 2 inch hitch receiver; that will offer you many more options in terms of accessories than the smaller 1-1/4 inch receiver. With that in mind, I recommend the Draw-Tite Max-Frame # 76138 for your 2017 Mazda CX-5, which is a Class III hitch with a 2 inch receiver. There are no drawbacks to installing this hitch over its Class II counterpart, the Curt # C12170, as the Class III offers the flexibility you mentioned. Since you plan on towing, I recommend...
view full answer...
- Trailer Hitch Receiver Fit For 2024 Mazda CX-5The correct trailer hitch receiver that fits your 2024 Mazda CX-5 is the following: - Curt Trailer Hitch Receiver # C12170 I verified this fit directly with the manufacturer for you.
view full answer... - Will The Curt Class 3 Hitch C13315 Fit A 2024 Mazda CX-5?While we have not yet (October 16, 2023) confirmed the # C13315 to fit the 2024 models, I believe it is safe to assume that it will carry over to 2024, since the # C12170 has been confirmed. Both hitches use the same configuration for the side flanges, and both install in the same location. I will say that we cannot give a 100% guarantee that it will fit. We would need to get word from Curt, or get our hands on a 2024 model here at our shop in order to confirm fitment. As far as we are...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Video by:
Joe V
Video by:
Dustin K
Video by:
Jonathan Y
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Amanda M
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
4/20/2024
Thats awesome about the install - bet it feels nice to do that yourself! Glad it went well! Also, wiring harnesses are sold separately. Part # TK85VR is what you would need if you still need one.