Does Draw Tite Hitch part # 76138 Fit 2017 Mazda CX-5

Question

Question:

Hi, can you confirm that this hitch will fit the 2017 Mazda CX5, the pictures show it on the 2016, I want to make sure it still works for the 2017. Thanks

asked by: Kevin R

0

Expert Reply:

Yes, I checked with Draw Tite and the hitch part # 76138 that you referenced is a confirmed fit for your 2017 Mazda CX-5. We have install pics for it on the 2016 model which it also fits, but haven't had the chance to install it on a 2017.

expert reply by: Jameson C

0

Answer 1

I did some research on the internet and found that some of the bolts may be behind plastic tabs on your 2007 Mercedes-Benz ML350. The rear bumper may also have safety cables attached to the rear mud flaps. You will also have to remove a center fascia…

view full answer...

Answer 2

There are two sizes and two classes of hitch offered for your 2015 Mazda CX-5. These are the 1-1/4-inch Class II type and the higher-capacity 2-inch Class III type, such as the Draw-Tite #76138. The linked page will show you all available hitches and…

view full answer...

Answer 3

For the installation of the Draw-Tite Trailer Hitch, part #76138 the muffler is very easy to remove. You just remove the two fasteners at the rear of the muffler and the 2 fasteners on the exhaust pipe going into the muffler and you can get the…

view full answer...

Answer 4

Yes, the Draw Tite hitch part #76138 is a confirmed fit for your 2016.5 Mazda CX-5. This hitch actually fits both the early and late model 2016 CX-5 models.

view full answer...

Answer 5

None of the trailer hitches for the 2016 Mazda CX-5 require any cutting or trimming of the fascia. The instructions for the hitches are linked on their product pages for you to take a look at. For a hitch to use with a bike carrier I recommend going…

view full answer...

Answer 6

I've attached a video of the installation of the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76138. In the video our installer uses a 6 inch extension but he does reference that you can use a swivel socket…

view full answer...

Answer 7

For your 2016 Mazda CX-5 I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76138 due to it having a 2" receiver which will give you many more options when it comes to accessories like a bike rack,…

view full answer...

Answer 8

We have everything you need to tow your small trailers with your 2016 Mazda CX-5. I have listed all of the parts that I recommend below. Class II Trailer Hitch - #C12170 4-Flat Wiring Harness - #118563 Adjustable Ball Mount - #MT70068 Hitch Ball -…

view full answer...

Answer 9

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76138 is an excellent option 2016 Mazda CX-5. In regards to installation, you will need to lower part of the exhaust but this is required for all trailer hitches for this vehicle. I know this may…

view full answer...

Answer 10

Both hitches share the same basic design and the same capacity, but I'd personally choose the Curt #13342 over the Draw-Tite #75376 because I feel that Curt does a better job with their powder coat finish. To realize the full capacity of the…

view full answer...

Answer 11

Bike racks that are used on a Class I trailer hitch receiver are only allowed up to 2 bikes. This is because the additional force from weight being extended out from the vehicle is too much leverage for the vehicle to handle and could cause damage to…

view full answer...

Answer 12

It's a warranty situation for the Curt hitch. It's not that the Draw Tite is necessarily stronger than the Curt it's just that they approach the idea of carrying a non-supported load more cautiously than Draw Tite. The only thing is that…

view full answer...

Does Draw Tite Hitch part # 76138 Fit 2017 Mazda CX-5

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching