Parts Needed to Tow a Trailer with 2019 Jeep Cherokee
Question:
our jeep Cherokee goes into 2 wheel drive to tow. What package do we need?
asked by: Robert K
Expert Reply:
If you are wanting to tow a trailer with your 2019 Jeep Cherokee, you will need a trailer hitch, wiring harness, and a ball mount/hitch ball combination.
Starting with the trailer hitch, I recommend the Curt Class III Trailer Hitch # C13171. This Class III hitch is confirmed to fit your Jeep Cherokee that goes into 2 wheel drive and will use existing holes in its frame for a no-drill installation. It will provide you with a 2 inch receiver and it features a 5,000 pound towing weight capacity. You will also want to check your Jeep's owners manual for its specific ratings, as you will need to follow whichever capacity is lower (the Jeep's or the hitch's).
I have attached an isntallation video that you can use for reference.
If your Jeep does not have the factory tow package, you will need to add a 4-Way wiring harness. For this I recommend the Curt # C56406. This custom harness will install by plugging into factory ports behind the driver and passenger side tail lights. The 4-Way will connect with and power a trailer's basic signal lights.
If you will be towing a trailer with electric brakes, you will also need to install a brake controller like the excellent Tekonsha Prodigy P3 # 90195. To install the controller (if you do not have the factory tow package), you will first need to convert the above-mentioned 4-Way to a fully functional 7-Way with the Universal Wiring Kit # ETBC7. This kit includes everything necessary to accomplish this along with the additional parts needed to install the brake controller.
If you do have the factory tow package, then all you will need to install a brake controller is the Plug-In Adapter # 3014-P. One end of the adapter plugs into the controller itself and the other end connects to the built-in port beneath the Jeep's dash.
In order to pull a trailer, you will also need a ball mount and hitch ball. I have attached a great article that explains how to choose the best one for your setup, along with a link that will take you to our available selection. I have also included a couple articles on trailer towing that you might find helpful.
Products Referenced in This Question
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Hitch
- Shop: Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank - 6K GTW, 600 lbs TW
- Shop: Trailer Wiring
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Brake Controller
- Q&A: Locating Correct Wires on 2019 Jeep Cherokee to Install Tow Ready Tail Light System # TR118821
- Q&A: Removing Kick Panel of 2014 Jeep Cherokee to Install Brake Controller
- Search Results: 7 pin trailer wiring harness
- Q&A: Should 12 Volt Hot Lead on 7-Way Trailer Connector Be Hot All the Time, WIll it Drain the Battery
- Q&A: Location of Brake Controller Plug 2019 Jeep Cherokee Limited
- Video: Demco Stay-IN-Play DUO Supplemental Braking System Installation - 2021 Jeep Cherokee
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Shop: Vehicle Tow Bar Brake System
- Article: How Much Does a Boat and Trailer Weigh?
- Video: Trailer Hitch Installation - 2018 Jeep Cherokee - Curt
- Video: Curt Trailer Hitch Ball Mount Review C45070
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56208 Review
- Video: Curt Trailer Wiring Harness Installation - 2018 Jeep Cherokee
- Search Results: c13172
- Search Results: ball
- Search Results: hitch pins and clips
- Shop: Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: weight distribution hitch
- Q&A: Which Curt Hitch Provides More Ground Clearance for a 2018 Jeep Cherokee
- Q&A: Will Curt Hitch part # C13172 Fit a 2014 Jeep Cherokee Trailhawk
- Q&A: How to Determine Correct Ball Mount Rise or Drop for Towing a Trailer with a 17 Inch Coupler Height