Can the Yakima Backswing be Used with Other Hitch Adapters

Question

Question:

Im confused about why the Yakima Backswing doesnt work with 1.25in accessories with 2 inch adapters. Is it just because theyre worried about the strength of the accessories? How could it differentiate fit wise between a native solid 2 inch slide in and a 1.25 in slide in with a 2inch adapter over top of it. Thanks!

asked by: Tim M

0

Expert Reply:

The Yakima BackSwing, part # Y02483, is essentially an adapter that gives a hitch mounted accessory the swinging feature. If you are to use a 1-1/4 to 2 inch expander, like part # 80303 which is also and adapter, you would be using two adapters which is never recommended.

expert reply by: Charles S

0

Answer 1

Yes, it does. The arm on the Kuat Pivot 2 Swing Away Hitch Extender item #PVD20B locks at 90 degrees and opens up to 120 degrees. I have attached a photo below that shows how this function works.

view full answer...

Answer 2

Realistically there isn't much difference between the two extenders you referenced aside from price. Both are extenders that go from 1-1/4 to 2 inch and are both right at 6 inches in length. If it were me I would go with the Curt #C45785 over the…

view full answer...

Answer 3

Yes, it will. The Kuat Pivot Swing Away Hitch Adapter part #PVP20B can be used with the Thule T2 Pro XTR Bike Rack for 4 Bikes item #TH69TX. You shouldn't have an issue with weight because you are driving a truck but the Kuat Swing Away reduces…

view full answer...

Answer 4

From a previous customer we spoke with we found that on the Ram Promasters like your 2018 model the distance from the bottom of the hitch opening to the bottom of the door when swung out measures right at 9-1/4 inches. The Yakima Bikeswing Part…

view full answer...

Answer 5

The threaded portion of the hitch pin of the Yakima Backswing part #Y02483 is long enough to fit through a 2-1/2 inch hitch adapter.

view full answer...

Answer 6

Using a 2-1/2-inch to 2-inch hitch reducer sleeve like #C45405, #BWRHXA2182 or #DTADP35 will allow a 2-inch accessory to fit in your 2-1/2-inch hitch but these Thule and Yakima bike racks you mentioned include their own anti-rattle locks that will…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...