Inno Roof Rack and Canoe Carrier for 2013 Kia Sportage with Bare Roof

Question

Question:

Hello, I have a bare roof on my basic model Kia Sportage 2013. I need to transport a canoe about 20 feet. Would this kit be all i need for the complete roof rack and does it fit my vehicle roof style? Thanks for your help. Part Numbers: INB137,INSUT,INK701

asked by: Tatjana

1

Helpful Expert Reply:

Roof racks for your 2013 Kia Sportage that has a bare roof are displayed on the linked page and these include racks from Inno and others. For the Inno 54-inch square bar rack you referenced you will need to order parts # INB137, # INSUT and # INK701.

On your vehicle this rack will install with a 28-inch bar spread; the rack weight capacity is 120-lbs. It is a good idea to check your Kia owner's manual to make sure your roof can handle the weight of the canoe. Of course, the canoe cannot weigh more than either the rack capacity or the roof capacity.

The other linked page displays the canoe carriers that will fit on the Inno square bars. These include pad style carriers like Rhino-Rack's # RRRWP05, saddle carriers like the lightweight Swagman Exo Aero carrier # S65145 and even gunwale-mount carriers like Thule's Portage # TH819 and Yakima's KeelOver # Y04069.

expert reply by: Adam R

1

Answer 1

The only option we have for a motorcycle carrier with a Class C motorhome is the Ultra-Fab Motorcycle Carrier part #UF48-979033 that you referenced. We spoke to Ultra-Fab a few times and they assured us that the carrier can be used at the back of an…

view full answer...

Answer 2

That all depends on what roof rack you have or that you are looking at. The Thule Hullavator Pro #TH898 itself weighs in at 39.7 lbs but that is not including any roof rack parts. If you could verify which roof rack you have I can let you know the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 10

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 11

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 12

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...