Will Hopkins 4-Way Trailer Connector Fit Brophy Mounting Bracket # BK4F

Question

Question:

Will this bracket work with the Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector Item # HM43575?

asked by: Ken D

0

Expert Reply:

Brophy mounting bracket # BK4F is designed to fit a standard 4-Way flat trailer connector so I don't see any reason why it wouldn't work with Hopkins wiring harness # HM43575.

expert reply by: Michael H

0

Answer 1

Although the T-One Vehicle Wiring Harness you mention obtains its signals from plugging inline with the existing tail light wiring harnesses, the voltage to power the trailer lights needs to be drawn directly from the battery. The reason for this is…

view full answer...

Answer 2

For your 2010 Ford Fusion we have the Draw Tite hitch part #24865 which is a confirmed fit and would work well for carrying your 1-1/4 inch hitch bike rack. I attached an install video for this hitch for you to check out as well.

view full answer...

Answer 3

Yes, the 4-way connector of the part #C55411 that you referenced will work well with the 4-way mount part #BK4F that you also mentioned.

view full answer...

Answer 4

You seem to have found the silver lining in that your 2014 Ford Fusion is well built! Look for a factory harness that goes from the cab of the vehicle through the firewall. You may have to look in some tight places. If you cannot locate a harness, or…

view full answer...

Answer 5

Ball mounts like the Curt #C45100 are available in various lengths. This one happens to be 13-inches long, longer than some. Longer ball mounts are needed, for example, in cases of a truck having a slide in camper in the bed, or when using a…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Hey Andrew, for a mostly hidden trailer hitch that fits your 2024 Toyota Sienna XLE we have the EcoHitch part #EH22SR which only has the lower hitch opening hanging below the rear bumper. We do not have a totally hidden option.

view full answer...

Answer 9

The etrailer class 3 hitch #e38KR will indeed fit your 2024 Kia Sportage. We have confirmed with the manufacturer that it will carry over to the 2024 models. Install will be pretty easy, just 3 bolts on each side and no drilling required. You may…

view full answer...

Answer 10

I have both a 4-way and 7-way connector that are custom fit for your 2023 Chevy Traverse. They are the 4-Way Curt T-Connector Vehicle Wiring Harness item #C56394 and the 7-Way Curt T-Connector Vehicle Wiring Harness item #C56393. These custom-fit…

view full answer...

Answer 11

Yes we can! The correct hitch for the 2024 Toyota Highlander Platinum is the etrailer Class 3 hitch #e75ZR. We double checked with the manufacturer and confirmed that it will indeed fit the Platinum model. The etrailer #e75ZR hitch is considered a…

view full answer...

Answer 12

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Will Hopkins 4-Way Trailer Connector Fit Brophy Mounting Bracket # BK4F

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching