2010 Ford Fusion Hybrid Trailer Hitch Recommendation for Hitch Bike Rack

Question

Question:

I have the Bike Rack retractable two-bike rack that I used on a Volvo. Now, I want to buy a hitch to put on my 2010 Ford Fusion Hybrid to continue using my bike rack. What hitch will fit my 2010 Ford Fusion Hybrid and can I still use my old rack. I believe the connection is 1 1/4 inch. Thanks!

asked by: Clare S

1

Helpful Expert Reply:

For your 2010 Ford Fusion we have the Draw Tite hitch part # 24865 which is a confirmed fit and would work well for carrying your 1-1/4 inch hitch bike rack.

I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

1

Answer 1

Although the T-One Vehicle Wiring Harness you mention obtains its signals from plugging inline with the existing tail light wiring harnesses, the voltage to power the trailer lights needs to be drawn directly from the battery. The reason for this is…

view full answer...

Answer 2

Yes, the 4-way connector of the part #C55411 that you referenced will work well with the 4-way mount part #BK4F that you also mentioned.

view full answer...

Answer 3

The Draw-Tite Trailer Hitch Receiver #24897 that you referenced will work on your 2013 Ford Fusion Hybrid. You will need to either trim a fascia piece or have it removed all together to install this hitch. Check out the installation instructions I…

view full answer...

Answer 4

You seem to have found the silver lining in that your 2014 Ford Fusion is well built! Look for a factory harness that goes from the cab of the vehicle through the firewall. You may have to look in some tight places. If you cannot locate a harness, or…

view full answer...

Answer 5

Ball mounts like the Curt #C45100 are available in various lengths. This one happens to be 13-inches long, longer than some. Longer ball mounts are needed, for example, in cases of a truck having a slide in camper in the bed, or when using a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

2010 Ford Fusion Hybrid Trailer Hitch Recommendation for Hitch Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching