Trailer Wiring Harness Installation- 2010 Ford Fusion Video

For your 2010 Ford Fusion we have the Draw Tite hitch part #24865 which is a confirmed fit and would work well for carrying your 1-1/4 inch hitch bike rack. I attached an install video for this hitch for you to check out as well.

Although the T-One Vehicle Wiring Harness you mention obtains its signals from plugging inline with the existing tail light wiring harnesses, the voltage to power the trailer lights needs to be drawn directly from the battery. The reason for this is…

Yes, the 4-way connector of the part #C55411 that you referenced will work well with the 4-way mount part #BK4F that you also mentioned.

The Draw-Tite Trailer Hitch Receiver #24897 that you referenced will work on your 2013 Ford Fusion Hybrid. You will need to either trim a fascia piece or have it removed all together to install this hitch. Check out the installation instructions I…

You seem to have found the silver lining in that your 2014 Ford Fusion is well built! Look for a factory harness that goes from the cab of the vehicle through the firewall. You may have to look in some tight places. If you cannot locate a harness, or…

Ball mounts like the Curt #C45100 are available in various lengths. This one happens to be 13-inches long, longer than some. Longer ball mounts are needed, for example, in cases of a truck having a slide in camper in the bed, or when using a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…