Can Roller Bunks be Used on a Boat Ramp Using 2 x 6 Boards
Question:
I’m looking to use these for a shore ramp to pull my boat out onto the bank. I would like to use 2x6” boards mounted vertically as the boat is a modified V.. How would I mount these rollers to the 2” 1.5” side of the board and would they be stable enough to pull a 1500 lb boat onto it?
asked by: Rob
Expert Reply:
There are mounting holes in the bases of the Dutton-Lainson Boat Trailer Deluxe Roller Bunks # DL21741. You would need to use corrosion resistant hardware obtained locally and attach the bunks directly to the short ends of the boards.
But there is a better option, # DL21755. These were designed to fit on the short "2" inch side of a 2 x 4, or in this case a 2 x 6. The mounting holes are on the sides of the bases. The bases will essentially fit around the short side and the hardware will bolt through the wood and the bunk bases. This will be much more stable than using the other style of bunks.
Each set of the bunks is rated for a total of 3,000 pounds so they can handle the 1,500 boat, no problem. If you use bunks # DL21755 it will be as stable as the boards they are mounted to.
Products Referenced in This Question
Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Continue Researching
- Q&A: How To Install Roller Bunks on a Malone Watersport Trailer
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Shop: CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Q&A: Roller Bunk Recommendation for a Boat Trailer with Wood Bunks
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21741 Review
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10003G-4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Shop: Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Q&A: Can Trailer with 4 Foot Bunks be Replaced with 5 Foot Roller Bunks
- Shop: Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson
- Shop: CE Smith Padlock Brackets for Spare Tire Carriers - Zinc-Plated Steel - 1 Pair
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Q&A: Roller Bunks Rated for More Than 1,500 lbs
- Q&A: Roller Bunk Recommendation for Carpet Bunks that are 4 inches Wide
- Q&A: Roller Bunk Recommendation to Replace Wood Bunks on Boat Trailer
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Video: Review of Dutton-Lainson Boat Trailer Parts - Boat Trailer Roller Bunk Bracket - DL21762
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Water Test
- Q&A: Can I Remove the Keel Rollers and Add Bunk Rollers to a Boat Trailer for a Smoker Craft Boat
- Video: CE Smith Bolster and Swivel Bracket Assemblies Review
- Video: CE Smith Boat Trailer Roller Bunks Water Test
- Search Results: dl21755
- Search Results: dl21741
- Search Results: ce10003g~4
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Shop: Trailer Wiring