Roller Bunk Recommendation to Replace Wood Bunks on Boat Trailer
Question:
I have a 17foot deep v aluminum smokercraft with a 90hp 4 stroke. Its heavy in the rear 400lb engine 24 gallons of fuel 92 inch beam. I had a hard time getting it off the trailer with carpet, i installed the Caliber covers now its almost impossible the rivets sink into the vinyl covers after setting for 5 days. I pull the boat in until it floats pull forward just to get on the truck bumper. Beds are 2x6x8 ft would the roller assemblies be strong enough 2 4ft sections to replace each 8ft bunk.
asked by: Neal W
Expert Reply:
Roller bunks would be stronger than wood bunks since metal is much stronger than wood. The rollers would allow your boat to not have to be launched so deep too since it can roll off of the trailer.
For 4 foot sections of roller bunks we have the part # CE27700.
Product Page this Question was Asked From
CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- 4-3/4 Inch Wide
- Plastic
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson
- Q&A: How To Install Roller Bunks on a Malone Watersport Trailer
- Shop: CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Q&A: Roller Bunk Recommendation for a Boat Trailer with Wood Bunks
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21741 Review
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10003G-4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Shop: Boat Trailer Standard Roller Bunks - 5' Long - 12 Sets of 2 Rollers - by Dutton-Lainson
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Q&A: Can Trailer with 4 Foot Bunks be Replaced with 5 Foot Roller Bunks
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Video: Review of Dutton-Lainson Boat Trailer Parts - Boat Trailer Roller Bunk Bracket - DL21762
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10001G-4 Review
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Water Test
- Search Results: dl21755
- Search Results: dl21741
- Search Results: ce10003g~4
- Q&A: Conical Tooth Washer Placement for Trailer Hitch Installation on a 2010 Toyota Yaris
- Q&A: Roller Bunks Rated for More Than 1,500 lbs
- Q&A: Replacement Hardware for Trailer Hitch on 2007 Toyota Highlander
- Q&A: Can I Remove the Keel Rollers and Add Bunk Rollers to a Boat Trailer for a Smoker Craft Boat
- Shop: Roof Rack
- Search Results: winch strap