Dimensions of the Replacement Velcro Strip for Extang Express Tonneau Covers Part # EX1044

Question

Question:

Is this 1wide. part # EX1044

asked by: Marlin

0

Expert Reply:

I spoke to my contact at Extang and he informed me that the Replacement Velcro Strip for Extang Express Tonneau Covers part # EX1044 is 1" wide x 8' long. The velcro strips are cut to fit and designed to fit into the rails on the Extang Express tonneau covers. If this velcro strip does not work for you please let me know what tonneau cover you have and I would be happy to see if we have a better fit for you as we stock various types of replacement velcro strips for tonneau covers.

expert reply by: Conner L

0

Answer 1

As long as the rails that the Velcro slides into on your Ionic cover is 1" wide, the Replacement Velcro Strip for Extang Express Tonneau Cover 8' Long x 1" Wide #EX1044 will work. It hasn't been tested officially but if it the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

You are a little on the warm side for your transmission fluid. If you can keep it under 200 degrees you will have the max life out of it. That being said transmissions really start to go downhill at 260 degrees. The Derale cooler part #D13503 with…

view full answer...

Answer 9

The best place to confirm the towing capacity of your 2015 Chevy Silverado 1500 Crew Cab 4x4 with 5.3-liter V8 engine is the printed owner's manual. This will reflect the capacity of your specific pickup with the particular mix of equipment…

view full answer...

Answer 10

Normally, the tongue weight should be somewhere between 10 and 15 percent of the loaded trailer weight. For your trailer it would mean somewhere between 780 and 1200-lbs. The #C17501 system is designed for tongue weight between 1,000 and 1,500-lbs so…

view full answer...

Answer 11

Congrats on the new trailer! However you need to know the loaded tongue weight of your trailer, as the dry weight is not a useful figure. With your trailer fully loaded like you'll be towing it use either the scale method in the below help…

view full answer...

Answer 12

Hey Jay, yes the CE Smith Multi Sport Kayak Trailer part #CE48870 would work great to transport a 2024 Old Town Bigwater EPDL 132. The bunks can be moved all the way together if needed and the angle is adjustable as well so you'd be able to fit…

view full answer...