etrailer.com Trailer Hitch Installation - 2009 Chevrolet Silverado Video

The etrailer brand #e98849 hitch which is a confirmed fit for your 2010 Silverado. The hitch installs using 6 bolts, two of which use nuts that are welded up into the holes closest to the rear of the frame as shown in the provided diagram. Two…

To verify that the Provider ST205/75R15 Radial Trailer Tire w/ 15" Silver Mod Wheel #TA43ZR will fit your hub with a 5-bolt pattern all you need to do is measure the distance between your lugs. I have attached a photo from the linked…

Usually a trailer axle will have a sticker or plate on it to indicate its weight rating. This may not be on the VIN sticker but it should be on at least one of your two axles. If not, contacting the manufacturer (Forest River, 574-264-4519) with…

There's a chance the Curt hitch part #E-3S would fit your 2010 Chevy Silverado but since this is a universal style hitch that's never been fit tested on your truck we can't guarantee that. We do have hitches for your Silverado…

I would be happy to help you set your 2005 GMC Sierra up to tow your trailer. With that low of a towing capacity I can safely assume you have a 1500. That is what my recommendations are going to be based on. Along with a weight distribution system…

The Curt Hitch part #C19031 that you referenced is a universal fit hitch that is designed to fit several vehicles. The distance between the mounting holes is 10-1/2 inches. Most likely there would be drilling for installation. A better solution for…

Thanks for all the information about your truck, that certainly makes this easier! Here's what I found in your owner's manual. A 2005 Silverado 1500 Crew Cab short bed with the 5.3L engine with a 3.23 rear axle can tow 6700 lbs, or up…

Good question, and there is just a single difference between the Curt and etrailer trailer hitches that fit your 2010 Chevy Silverado 1500, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so…

To ensure you have enough towing capacity with your 2010 Chevy Silverado 1500 I'd recommend a Class IV hitch like the Curt #14301 as the Class III hitches for your truck are limited to 6,000 lb total trailer weight.

Thank you for the photo of your Holland and England brand trailer. Usually the trailer manufacturer's name, model number, weight capacity and vehicle identification number (VIN) will be on the same placard or plate. This plate is often…

The Pollak 7-Pole connector #PK11916 is made for twist-in installation on OEM bumpers. We do not offer the metal OEM bracket part that this item fits into but that might be available at a dealership. What you can use is 7-way socket #A10-7072VP…

In regards to the Curt Trailer Hitch Receiver part #13322 which is a fit for your 2006 GMC Sierra 1500, the bolts that are used to secure the trailer hitch to the bumper are M14-2 x 40mm hex bolts. Therefore, the weld nuts inside the bumper are…