Using Erickson Roller Idler Along with E-Track Tie Down Ring
Question:
When using the Erickson Roller Idler for E-Track what E-track tie down anchor do you recommend using for the ratchet end of the tie down? Is it critical that the force is now parallel rather than perpendicular to the E-track? ie. you are pulling the anchor to the side rather than up away from the track Does this direction of pull decrease the capacity of an anchor such as the 59147 2,000lbs Erickson tie down ring? Thanks
asked by: Greg Z
Helpful Expert Reply:
The Erickson E-Track Tie Down Ring # 59147 that you mentioned will work very nicely along with the Erickson Roller Idler # EM09144. This tie down ring has a Safe Working Load Limit of 2,000 pounds and a 6,000 pound capacity. As you referenced in your question, when using this with the Roller Idler that will act as an anchor point, the strap will then be fed through the ratchet and run more parallel to the E-track. This will not affect the weight capacity of the Tie Down Ring. I confirmed this with my contact at Erickson.
Another option you might consider instead of adding the D Ring is a ratchet strap like # EM59136, which will attach directly to the E-track. I have included a short video demonstration on this product that you can take a look at.
Products Referenced in This Question
Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs
- E-Track
- E-Track Straps
- 2 Inch Wide
- 1000 lbs
- 12 Feet Long
- Erickson
more information >
Product Page this Question was Asked From
Erickson Roller Idler for E Track - 3,300 lbs
- E-Track
- E-Track Anchor
- 3300 lbs
- Erickson
more information >
Continue Researching
- Video: Review of Erickson Tie Down Anchors - Trailer Tie-Down Anchors - Track Systems and Anchors - EM09144
- Search Results: roller idler
- Search Results: e76yr
- Search Results: over tire straps
- Search Results: strap pads
- Search Results: e~track anchor
- Shop: Erickson Roller Idler for E Track - 3,300 lbs
- Shop: Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs
- Shop: etrailer E Track Roller Idler - 1,333 lbs - Qty 1
- Shop: etrailer E-Track Backing Plates w Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 16
- Shop: Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Video: etrailer Horizontal E-Track Review
- Search Results: e~track
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Article: How to Install E-Track in 3 Easy Steps
- Shop: Trailer Hitch
- Q&A: What is The Height From The Track To The Bottom Of The Roller on E-Track Roller Idler # e67HR?
- Article: Trailer Wiring Diagrams
- Video: Erickson E-Track Tie-Down Kit with Ratchet Straps, Wheel Chocks, and Roller Idlers Review
- Shop: Trailer Wiring
- Search Results: etrack
- Q&A: Tie-Down Recommendation for Bulldog Winch Ratcheting Wheel Tie-Down Strap
- Video: Interaction with E-Track
- Q&A: Backing Plates And Wheel Straps For Securing Vehicles In Enclosed Trailer With E-Tracks
- Article: Determining Trailer Tongue Weight
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Q&A: Can E Track be Used to Secure Car in Car Hauler Trailer
- Article: Cargo Tie-Down Methods
- Video: etrailer E-Track Backing Plate with Hardware Review and Installation
- Shop: Brake Controller