Troubleshooting Wiring on Ultra Fab Electric Trailer Jack
Question:
I have an Ultra Fab electric jack #3502-7 on my trailer. I was moving the trailer the other day, and the motor stopped working. The lights came on, so I had power. I was able to jack the trailer by using the bolt and ratchet at the top. Is there something I can check on the motor to see if it will work againg, or is it time to replace.
asked by: John J
Expert Reply:
To test your jack, I recommend first checking your trailer battery for proper charge. The lights will require far less power than the motor, so lights may come on but you still may not have enough juice to power the motor.
If the battery is not an issue, I recommend running a jump wire to your motor from the positive terminal of a 12V battery. The motor will have two 12V wires because the polarity will determine extending or retracting. If the motor functions, then you know you have a wiring issue or a bad switch. You can use a circuit tester like # PTW2993 to test the wiring and switch and replace as needed.
If direct power to the motor does not work, then you know the motor has burned out and it will need to be replaced. Since you are able to manually adjust it, you know the threads on the jack and the gears are working properly.
For a replacement, I recommend the Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs # UF38-944040. I've attached videos of this jack for your review.
Products Referenced in This Question
Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 3001 - 4000 lbs
- Electric Jack
- 18 Inch Lift
- Bolt-On
- With Round Foot
- Ultra-Fab Products
more information >
Product Page this Question was Asked From
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Troubleshooting Phoenix 4000 Electric Jack Not Working
- Shop: Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black
- Q&A: Why Does My Electric Trailer Jack Beep when the Trailer is Not Hooked Up
- Q&A: Troubleshooting an Ultra-Fab 4000 Electric Tongue Jack That Keeps Blowing Fuses
- Shop: Floor Mats
- Shop: etrailer Cargo Area Protector - 48" Wide - 3 Piece - Black
- Q&A: What Gauge Wire and Fuse Should be Used to Install Bulldog A-Frame Trailer Jack BD500187
- Shop: Ultra-Fab Electric A-Frame Jack w/ 2-1/4" Tubing - Drop Leg - 22-1/2" Lift - 4,000 lbs
- Shop: Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
- Shop: Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs
- Shop: Lippert Smart Jack Electric Trailer Jack w/ Footplate - A-Frame - 22-1/2" Lift - 3.5K - Black
- Shop: Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs
- Video: Review of Stromberg Carlson Camper Jacks - A-Frame Jack - SC63VR
- Video: Ultra-Fab Electric A-Frame Jack Review UF38-944017
- Article: Trailer Wiring Diagrams
- Q&A: Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner Steadies
- Shop: Trailer Hitch
- Search Results: trailer jack
- Video: etrailer Electric Jack with Footplate Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Video: etrailer Landing Gear Set Review
- Search Results: jack
- Q&A: Overall Length of the 24" and 30" Ark Drop Down Corner Stabilizer Jacks
- Shop: Suspension Enhancement
- Article: How to Choose the Right Trailer Hitch Class
- Video: etrailer Electric Jack with Footplate and 7-Way Plug Review
- Search Results: stabilizer jack
- Search Results: electric trailer jacks
on Wiring
