Erickson E-Track Strap with Ratchet Review Video

You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with Hardware #e76YR.…

There really isn't a profile difference between the tapered style of Tow Rax L-Track like the part #TWSP12TAB and the low profile #TWSP72TA. The low profile does sit a little taller at 1/2 inch tall whereas the tapered is 7/16 inch.…

The strap I would recommend is the part #EM58523 with the Erickson E-Chock Wheel Chocks #EM09162-2 that you referenced. This strap attaches to the slots of the E-track like the chocks so it will install easily and work well.

Yes, the wheel of a motorcycle or bicycle can rest on an e-track no problem.

I do have a solution for you, but I think welding something to the floor is going to really limit where you can place things to have them tied down. I don't think you're going to be able to get away from the issue with galvanic…

The Tow-Rax system is compatible with the Erickson O-Track System and vice versa. The weight capacities/restrictions are based on the attachments themselves, so those individual capacities are what you will want to pay attention to when interchanging…

Tow Rax states that the capacity for the Tow-Rax Low-Profile Floor Track #TWSP72TA is based on the attachments that are used in it. So in your case you'd just be limited by the capacity of the anchors you installed in the track. The amount of…

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

Stainless steel hardware would be the best type to use when installing the Tow-Rax Low-Profile Floor Track for Tie-Down Anchors #TWSP72TA to prevent corrosion.

I reached out to my contact at Tow-Rax who confirmed that you can use the Tow-Rax Low-Profile Floor Track #TWSP72TA to install a winch mounting bracket on. The tracks will hold up just fine but you will want to make sure that your mounting hardware…

Powder coating and galvanization are both about the same in terms of rust resistance. If you like the black of the part #e42VR it would work just as well as a galvanized version #e62VR.

The etrailer e-track system #e42VR will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals.…