Dexter 7,000 lb Axle Hub and Brake Assembly Recommendation
Question:
This my axle from dexter, could send me part numbers for brakes auto adjust, bearing and race kit and seal
asked by: David B
Expert Reply:
Does the spindle look damaged at all? Sometimes bearings can be a pretty tight fit to the spindle but there should be enough clearance to allow the bearing to slip on without needing too much effort.
For Dexter 7k axles the bearing surfaces should measure 1.74 and 1.25. You'd want to make sure your spindle matches those diameters. Chances are the spindle may have gotten deformed from overheating and now it's not perfectly round.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Shop: High Pointe Over the Range RV Convection Microwave - 900 Watts - 1.5 Cu Ft - Black
- Search Results: 42866uc3~ez
- Q&A: Replacement Bearings, Races, and Seals for a Dexter Number 297697 7K Axle
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 5K Trailer Axles
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Video: Redline Trailer Suspension 126B2 Review
- Video: Dexter Trailer Hub and Drum Assembly Installation 42866UC3-EZ
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: Dexter 12" Left Hand Nev-R-Adjust Electric Trailer Brakes Installation
- Video: Review of Dexter Axle Trailer Brakes - Nev-R-Adjust Brake Assembly - 23-464
- Video: etrailer Trailer Idler Hub Assembly Review AKIHUB-440-2-1K
- Q&A: Is Gap Normal on Sides of Slipper Springs for Roadmaster Comfort Ride Leaf Spring Suspension Kit
- Video: Review of Roadmaster Trailer Leaf Spring Suspension - Springs - RM-2460-2570
- Video: Roadmaster Comfort Ride Leaf Spring Suspension Kit Installation - 2021 Grand Design Reflection Fifth
- Q&A: Recommended Roadmaster Trailer Shock Absorber System for 5,200 to 7,000 lb Axles
- Search Results: ce23003
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Q&A: How to Determine if the Grease Cap for a Hub
- Shop: Suspension Enhancement
- Search Results: castle nut
- Q&A: Should There Be a Washer Between Outer Bearing and Castle Nut on etrailer 2,000 lb Trailer Axle
- Q&A: Can Hub That Had Bearing Buddy Installed Be Used on Axle With EZ Lube Spindle
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch ball
- Search Results: ball
- Search Results: 2 inch ball
on Trailer Hubs and Drums
David B.
11/17/2017
This my axle from dexter, could send me part numbers for brakes auto adjust, bearing and race kit and seal