Will The AKIHUB-545-2-1K Hub Fit My SnowBear 5x8 Utility Trailer?
Question:
Hi, I have an old Snowbear 5x8 Utility Trailer. I took the bearings out and they are stamped L44643. The lug spacing is also correct with what I have. From the description, this part would appear to be a direct replacement but Im not sure what else I should check to verify. Any idea whether this will fit on my Snow Bear? Or is there anything else I should measure to ensure proper fitment? Thanks!
asked by: Liam
Helpful Expert Reply:
As SnowBear trailers are still being produced, and haven't been around long enough for any of the weird/rare spindle options, you will not need to measure anything else to confirm the fitment of the etrailer.com Trailer Idler Hub Assembly # AKIHUB-545-2-1K. As you already verified the bolt spacing and the inner and outer bearing numbers, you are perfectly good to go.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Spindle Nut 1"
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Article: Trailer Wiring Diagrams
- Video: etrailer Trailer Idler Hub Assembly Review AKIHUB-440-2-1K
- Search Results: cotter pin
- Search Results: castle nut
- Video: Review of TruRyde Washer For 1 Inch Spindle - SW1000
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-1K
- Search Results: coupler
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30820 Review
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: How to Determine if Kenda ST145R12 Tire and Wheel Will Fit
- Q&A: Is a Hub Lug-Centric or Hub-Centric if it Uses Bolts with a Tapered Head
- Shop: Blazer LED Trailer Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E
- Q&A: Is a Load Range D Trailer Tire Better for Long Trips than a Load Range C of the Same Size
- Q&A: Recommended Lug Nuts and Balancing For Lynx Wheel # LH45FR
- Q&A: Does the LH45FR Come with Lug Nuts and Center Caps
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: How to Find a Replacement Spindle and Hub for a 5x10 SnowBear Utility Trailer with 2000 lb Axle
- Q&A: Will 145/80-12 Trailer Tires Fit the Same Wheels as 5.30-12 Trailer Tires
- Search Results: snowbear trailer
- Search Results: st145r12
- Search Results: 5.30 x12 tire
- Search Results: snowbear
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Video: CE Smith Mounting Brackets for Trailer Fenders Installation
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-2K