Determining Wheel Bearings and Bearing Buddies For Snow Bear Utility Trailer 6000
Question:
can you tell me what size of wheel bearings are on a snow bear utility trailer model 6000 and can you get bearing buddys for it
asked by: Marvin B
Expert Reply:
Since trailer manufacturers do not make bearing information readily available to the public you would need either the bearing numbers from the bearings themselves or measure the spindle to know which bearings would fit. If you pull the hubs off and remove the inner and outer bearing there should be a number stamped into the side. You would also want to do this with the seal.
If you don't have the bearings, you would want to measure the spindle with a pair of digital calipers like part # PTW80157. I have attached a diagram for your reference. If you can provide me with this information I am happy to assist you further.
To get bearing buddies, you would want to know the inner diameter of the hub bore and if the hub bore is threaded or not.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range D
- Article: Most Popular Wheel Bearings
- Q&A: Difference Between Bias Ply And Radial Ply Trailer Tires And What Does Load Range Mean
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Search Results: 5.30 12 trailer tire
- Video: etrailer Trailer Idler Hub Assembly Review AKIHUB-440-2-1K
- Q&A: Determining Which Replacement Wheel Bearings Needed for SnowBear 8000 Utility Trailer
- Search Results: castle nut
- Search Results: coupler
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 1-7/8" Ball - Bolt On - 2,000 lbs
- Shop: Trailer Spindle Nut 1"
- Q&A: Recommended Grease For etrailer Trailer Idler Hub Assembly # AKIHUB-440-2-1K With Bearing Buddy
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Search Results: ball
- Search Results: hubs
- Search Results: trailer hitch ball
- Search Results: 2 inch ball
- Q&A: Picking Out Hitch Ball for Snow Bear Utility Trailer
- Q&A: How to Easily Determine Trailer Wheel Bolt Pattern
- Q&A: Will The AKIHUB-545-2-1K Hub Fit My SnowBear 5x8 Utility Trailer?
- Video: etrailer Trigger Latch Channel Tongue Trailer Coupler Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-2K
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 1-7/8" Ball - Bolt On - 2,000 lbs
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Hopkins Wiring - Trailer Connectors - HM48058 Review
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Jacks