Review of Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56011 Video

We can help you get your 2009 Mazda 3 Grand Touring Edition ready for your utility trailer. Curt Class I hitch #C11386 is a good choice along with ball mount #C45016. You will also need a hitch ball, either 2-inch ball #A-82 or 1-7/8-inch ball #A-80.…

The best way to tell whether or not your 2015 Mazda CX-5 came with LED tailights would be to contact the manufacturer with your VIN. They would be able to tell you without a doubt whether or not your vehicle has LED taillights. The other way would be…

To install a hitch like the Curt Hitch part #C11681 that you referenced on your 2015 Honda Accord you will need to trim the heat shield. For more info on that check out the install video and installation instructions I attached.

On Curt Euro ball mount #C45592 we are measuring from the top of the shank to the point below the ball where it starts to go straight up and down. I have linked a video that should clarify this for you. Curt must be measuring to the top of the ball.

Thank you for providing a photo of your trailer coupler. Trailers should always be level when hitched. If a trailer is out of level when towed it will tend to have more sway. I notice you have weight distribution (WD) lift brackets on your trailer…

I have attached a chart for you to take a look at that includes the lug nut torque specifications. If your wheel uses 1/2 inch lug nuts or wheel bolts like the 12 Inch Steel Spoke Trailer Wheel #AM20124 referenced in your question, you will torque…

The correct torque for installing lug nuts on your 5 X 8 trailer's 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The Curt trailer wiring harness you referenced, part #C56011, is a correct fit for your Mazda CX5. This plug-and-play harness connects at the tail light assemblies by plugging in between the vehicle wiring and the tail light assemblies. I have linked…

The Curt Trailer Hitch Receiver #C11525 is a confirmed fit for your 2021 Honda Accord non-hybrid. This is the only hitch available at this time. (April 2023). The Curt will work well for you, and it doesn't require fascia trimming to install it…

We have one hitch that will fit your 2018 Honda Accord, but it is a Class I, 1-1/4 inch hitch, the Curt #C11525. This Curt hitch has a 2,000 lb towing capacity and a 200 lb tongue weight capacity. You will also need the stabilizing straps #18050 with…

That depends on the cargo carrier and whether it is loaded or not. Many of the carriers will allow you to open the hatch when empty, but if you have a lot of stuff stacked on the carrier, your cargo may block the door. Now, there are cargo carriers…