Does Hopkins Trailer Wiring # HM48925 Fit 2004 Audi A6

Question

Question:

Will this wire harness work with my 2003 Audi A6? The trailer does not have brakes.

asked by: Patrick

0

Expert Reply:

Yes, the trailer wiring harness part # HM48925 is a confirmed fit for your 2003 Audi A6. This is a universal style harness though which will require you to test the wiring of your taillights and wire to the # HM48925 accordingly.

expert reply by: Jameson C

0

Answer 1

The Curt Hitch #C11192 that you referenced is confirmed to fit your 2006 Audi A3 and has towing capacities of 200 lbs tongue weight and 2,000 lbs total trailer weight so it should do well to tow your boat that only will put 50 lbs of tongue weight…

view full answer...

Answer 2

I'm unaware of any negative effects of installing a standard powered taillight converter like #C59496 on a 2014 Volkswagen Jetta SportWagen. I did look through the owner's manual, and I found where Volkswagen states "Never connect the…

view full answer...

Answer 3

First thing you need to do is figure out where the short is on your 4x8 trailer and fix it before you install another wiring harness on your 2002 Subaru Impreza otherwise you will just fry another converter. That's why you are having problems, it…

view full answer...

Answer 4

The Hopkins Tail Light Converter Kit with 4-Pole Flat Trailer Connector #HM48925 does not have a wire to tap into from your vehicle's battery. It is designed so you can spice into the taillight wiring harness at the rear of your 2005 Dodge…

view full answer...

Answer 5

If you want to hardwire in a trailer connector to your 1998 Toyota Tacoma then you can use #HM48925. It is just more work though when you could use a harness that plugs in line with the vehicle tail light wiring such as #HM43315. But it is totally up…

view full answer...

Answer 6

Hopkins Tail Light Converter Kit #HM48925 can be used on pretty much any vehicle since it is a hardwire kit. The 2008 Hyundai Accent (sedan and hatchback models) are represented in the list of fits though because it is such a big list it is easy to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...